User manual PARROT 3400 LS-GPS

[. . . ] In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages. No part of this manual may be reproduced or transmitted in any forme, by any means or for any purpose without express written consent. Product names appearing in this document are mentioned for identification purposes only. All trademarks, product names appearing in this document are registred property of their respective owners. [. . . ] Turn the scroll wheel until the kit says «VOLUME». Turn the scroll wheel towards the right to increase the volume or towards the left to decrease the volume. When you are happy with the level, confirm by clicking the central button or green button. Pairing The first time that you switch the kit on, you must pair your mobile phone with the hands-free kit. enable the Bluetooth mode on your mobile phone. For further information, refer to the chapter entitled «Pairing» in your mobile phone's user guide or check out the www. Once detected, «Parrot EVOL» is displayed on your phone. Enter the link code (1234) when prompted by your phone and then confirm. The CK3000 EVOLUTION connects to your phone and says «pairing successful». All the menus are now available when you click the central button and their name is announced by the hands-free kit when you turn the scroll wheel. You are now connected to the hands-free kit and can use it to make and receive calls. Turn the scroll wheel until the kit says «VOLUME». The kit says «LANGUAGE» and then the name of the current language. When you turn the central scroll wheel, the kit says the different menus. You can exit the menus by pressing the red button on the keypad or by not pressing anything for more than 15 seconds. Turn the scroll wheel towards the right to increase the volume or towards the left to decrease the volume. When you are happy with the level, confirm by clicking the central button or green button. Adding Voiceprints * Click the central button - the kit says «LANGUAGE» and then the name of the language currently used by the kit. Turn the scroll wheel until the kit says «ADD VOICEPRINTS». access the menu by clicking the central button or green button. The kit disconnects from the phone and is now ready to receive your contact names. Html On the left of the screen, click on the «Bluetooth phones» heading: by choosing the required phone, you can access all the configuration procedures. [. . . ] To do this, type a letter and confirm by pressing «Yes». With this function enabled, when you receive a call, the name of the person calling you is pronounced if it is already stored in your phone book and corresponding voice tag is assigned. The affected phones are Ericsson R520, T39, T68m and the first Sony Ericsson T68i phones (software version lower than R2E). This option allows the simultaneous use of these different phones during a single session of use. [. . . ]