User manual PARROT MINIKIT

[. . . ] To use the device in the office or at home, simply place it on a flat surface and use it for your calls (tip: remove the sun visor bracket for greater stability ). Green button: pick up / confirm · Connecting your Bluetooth phone/PDA To ensure that all the features on your phone can be used, a special pairing mode is built into the Parrot MINIKIT. Generic pairing - applies to most phones (supporting the Hands-free profile): Once your Parrot MINIKIT has been fully recharged, you must pair your Bluetooth phone/ PDA. From your Bluetooth phone, search for Bluetooth peripherals (consult your phone's user guide or refer to the «Support» heading on the www. [. . . ] sending DTMFs · During a call, you can send DTMFs (Dual-Tone Multi-Frequency) for touch-tone dial ling. This feature can be used for managing your voice mail, for example. Turn the wheel to scroll through the numbers. Repeat this sequence to send other DTMFs. clearing the memory · You can pair up to five devices. If you attempt to pair a sixth phone, the kit says «memory full». You must clear the memory by holding down both the red and green buttons for three seconds. Note: The use of certain features (voice recognition, redial, discreet mode) depends exclusively on your phone (support of the Hands-free or Headset profile). Refer to the Support heading on our www. Browse through the menus by turning the wheel and confirm with the green button or by pressing the scroll wheel. Add contact: enables you to prepare the Parrot MINIKIT for receiving a contact (sent one by one - refer to the chapter entitled «Receiving contacts»). Record keywords: to use the voice recognition feature and all its possibilities, record the following keywords: «general», «mobile», «work», «home» and «other». Update: enable this option before updating via Bluetooth (www. Voice recognition To use the Parrot MINIKIT's voice recognition feature, proceed as follows: Recording the keywords Click on the central button - the kit says «Language» and the name of the language currently used by the kit. Turn the scroll wheel until the kit says «Record keywords» and then confirm. If one or more keywords are already recorded, the kit selects the first keyword that has not yet been recorded. When a keyword is correctly recorded, the kit automatically goes to the next. As soon as all keywords are correctly recorded, the kit enables them automatically. You can exit the menu at any time by pressing the red button and then go back to record or modify the keywords whenever required. If you do not wish to record all the keywords, turn the scroll wheel to select the required word. [. . . ] The total or even partial reproduction, transmission or storage of this guide in any form or by any process whatsoever (electronic, mechanical, photocopy, recording or otherwise) is strictly prohibited without prior consent from Parrot. Registered trademarks All the names and trademarks mentioned in this document are copyright-protected and are the property of their respective owners. Modifications The explanations and specifications in this guide are given for information purposes only and may be modified without prior notice. They are deemed to be correct at time of going to press. [. . . ]