User manual PARROT MINIKIT SMART

[. . . ] Make sure that the Parrot MINIKIT Smart is correctly secured to the mount by checking the connection on both sides of the magnetic part. 4 Installation In order to prevent the device from moving while driving, lock the mount in place using the included Allen wrench. Conversely, if you feel that the MINIKIT Smart's magnets and its mount are inverted (repulsion rather than attraction), use the Allen wrench to unlock the mount's position and pivot its end. To release the Parrot MINIKIT Smart, press the release buttons on the craddle. Extract the microphone from the Parrot MINIKIT Smart and use the provided clips to install it on the sunvisor or on the dashboard. Installation 5 Note: Removing the microphone is necessary in particular during highway driving or when the noise level is high. Under normal ambient noise conditions, you may leave it on the Parrot MINIKIT Smart. Installing the phone Install your phone on the Parrot MINIKIT Smart by inserting its upper side first. If your phone supports the GPS feature, install it in an easily accessible and visible location. Charging the Parrot MINIKIT Smart The Parrot MINIKIT Smart must be charged before being used for the first time. To do so, plug the charger into your vehicle's cigar lighter or connect the Parrot MINIKIT Smart to your computer using a USB/mini-USB cable. The LED located next to the mini-USB port turns on to indicate that the battery is being charged. [. . . ] > The call is automatically launched if the voice tag is correctly understood. > If it is not the case, a confirmation message is asked by the kit. Confirm by saying «Yes» or «Call». Note: At any time, press the red key to exit voice recognition mode. Calling a contact with several phone numbers If there are several phone numbers associated to the contact you want to call, you can specify the type of number. To do so, the following vocal commands are available: - Home - At home - Work - At work - Office / At office - At the office - Mobile / on mobile - Cellular / on cellular - Cell / on cell - Mobile phone / on mobile phone - Cellular phone / on cellular phone - Cell phone / on cell phone - Other - General - Default - Preferred 10 Phone Calling a contact in the phonebook If the contact you want to call is in the phonebook of the phone connected to the Parrot MINIKIT Smart: 1. Press the jog wheel to enter the main menu and select Phonebook. Select a letter and press the jog wheel. > Once the contact chosen: Press the green button to call this contact. Or use the jog wheel to choose between different numbers of the same contact. Bringing up the last dialled number Hold down the green key of the Parrot MINIKIT Smart for two seconds to redial the last dialled number. Using the Parrot MINIKIT Smart while on a call Note: Navigation instructions are not played by the Parrot MINIKIT Smart during a call. Adjusting the volume Use the jog wheel during a call to adjust the communication volume. > The volume setting is saved for subsequent calls. Transfering a call to the phone During a call, if you want to continue the conversation on your phone (private conversation), press the green button of the Parrot MINIKIT Smart. > The call is automatically transferred to the phone. If you want to switch back to the kit, press the green button again. Managing a second call During a call, you can receive another call if your phone supports this functionality. - Press the green button to accept the second incoming call. > The first call is automatically put on hold. Parrot is not responsible for storage, loss or damaged to data during transit or repair. Any product wrongfully declared to be defective will be returned to sender and inspection, process and carriage costs will be invoiced to him. Information relating to the battery and to the charger Only use the cigar-lighter adaptable charger provided. Use only the provided USB cable with the cigar lighter charger. Remember to charge the device before storing for a long period of time. [. . . ] - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Canada Class B statement: This Class B digital apparatus complies with Canadian ICES-003 Declaration of Conformity We, Parrot S. A. [. . . ]