User manual PARROT ZIK QUICKSTART GUIDE

[. . . ] Visit the Support section of our website at www. parrot. com for further information. Content Using the Parrot PARTY for the 1st time. . . . . . . . . . . . . . . 06 Use cases. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Setting up the Parrot PARTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06 Meaning of the LEDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07 Connecting the Parrot PARTY to an audio player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08 Connecting a phone to the Parrot PARTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This step is optional you can click on Next. Select your Parrot PARTY and click on Next. If you are prompted to connect yourself to Windows Update, click on No. Follow the prompts to finalize the connection process and click on Finish. > Your devices are connected and ready to be used. Connecting the PARROT PARTY using the Mac Bluetooth software The following procedure only applies to the Leopard (TM) version If you use the Mac Bluetooth software, you have to connect the Parrot device to your computer before connecting your device with the Parrot Audio Configuration Tool software. This step is only necessary at the first use. Click on the Apple icon located up left of your screen. Select System preferences and click on the Bluetooth icon. > The Bluetooth configuration window is displayed. 9 3. Press the button of the Parrot PARTY. 4. Once the Bluetooth connection has been established with your Parrot PARTY, you can : · Control the volume of your Parrot PARTY. · Adjust the music settings via the equaliser function and the audio effects (VS Bass and Stereo Widening). · Enable the volume ramp option, which gradually increases the volume when you switch on the Parrot PARTY. · Adjust the time delay of the Parrot PARTY. This option is used to synchronise your audio system with your PC. · Find out the software version used by your Parrot PARTY Troubleshooting Problem No sound is coming through the Parrot PARTY. Solution - Ensure that the device is switched on (ON/OFF switch on the back of the device) and sufficiently powered. - Check that your device supports the Bluetooth A2DP profile and the source role. - Hold down the Bluetooth button on the Parrot PARTY for two seconds, then restart the search and connect. - The red colour means that the battery level is low (battery life is less than 15 min). Plug the Parrot PARTY into the mains: the LED turns violet to indicate that the device is being charged and then turns blue once the battery has been fully recharged. I cannot connect my audio player to the Parrot PARTY. The centre LED on the Parrot PARTY is red. 12 I used a Jack audio cable to connect my audio player, but I get no sound. - Check that the jack audio cable is properly plugged in to the Parrot PARTY and audio player. - Check that there is no Bluetooth connection with an audio player. [. . . ] Doing so will reduce the risks of electric shocks, short circuits, fire and injury. Registered Trademarks The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Parrot S. A. is under license. S3125A Mac, Apple and Leopard are trademarks of Apple Computer, Inc. , registered in the U. S. Other trademarks and trade names are those of their respective owners. [. . . ]