User manual PEAVEY 210 TXR DATASHEET

[. . . ] After you have inserted the disk, turn the instrument ON. You will see a message in the instrument display screen that says: Loading OS-DISK clears ALL MEMORY!!<Enter to Load/Escape to abort> Press ENTER and wait about 3 minutes for the new Operating System to load. When the new system has finished loading, you will see the following message in the instrument display screen: Loading Successful!! [. . . ] To transpose a single percussive instrument of the Drum track, assign the same note to the highest and lowest limit. For example, to change the snare (D2) set the parameter to «Note range from D2 to D2». Set the parameters and press ENTER to confirm the operation. Assignable values: C-1 . . . Determines the start and end point of the part to be affected. It is possible to specify Measure, Beat and `tick'. Assignable values: within the actual limits of the Song. It is not possible to specify a point beyond the end of the Song. Edit Song 7·13 Microscope The Microscope allows you to modify every single event recorded in the tracks. The Event List at the centre of the display shows all the events recorded. Event List track in edit ACCESSING THE EVENT EDIT MODE 1. Select the track whose events you wish to see in the Event List. Use the / buttons to scroll through the events. The selected notes are played automatically. Select the parameter to modify using the cursor buttons / . Use the DIAL to modify the selected parameter. measure beat resolution Value 1 Value 2 Value 3 event type (Status) Gate EVENTS AND PARAMETERS WHICH CAN BE CHANGED The «Status» column shows the type of event. The number can be specified with the DIAL. Specify the locator and press ENTER to confirm. After inserting the desired event, modify its parameters accordingly. INS TYPE. . . (F4) Recalls a dialog window where you can select the type of event to insert manually with the «Ins(x)» function. Select the event type to insert and press ENTER. 7·16 Reference Guide Master Track The Master Track editor allows you to modify the events recorded in the Master track which contains events pertaining to the general controls of the Song. This Track records changes in Performance, general Volume (Pedal Volume), Effect Changes, Effect Volume, Scale, Tempo changes, initial Time Signature and the Score Key. The structure of the page is analogous to the Microscope. The events are shown in the Event List at the center of the display. / to scroll through Initial parameters Event List bar beat resolution event type (Status) value 2. Select the parameter to modify using the cursor buttons / . Use the DIAL or the numeric keypad to modify the selected parameter. INITIAL PARAMETERS OF THE SONG The events that define the Song at the start point can be modified but not deleted. To access and modify the events press F1 («Start param»). Note: When loading a MIDI file, normally the Performance settings are ignored, due to the fact that commercially available MIDI files contain initializing events at the start of each track VOLUME - Overall volume, controlled by the Damper pedal set for continuous control and assigned the Volume function. KEY - Key for the correct visualization of the score. Alters the score according to the specified key (inserts the correct accidentals), rendering the score easier to read. [. . . ] 12 Power up and get to know the basics 2. 1 Precautions to observe when using SK disks with a computer 3. 8 A·50 Index Preload 2. 3 Saving and naming the modified sound 16. [. . . ]