User manual PEAVEY AUDITION CHORUS

[. . . ] only use attachments/accessories provided by the manufacturer. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] This Boost may be selected for Gain, Volume or both types simultaneously via the front panel switches. This capability gives you the equivalent of a three channel amp for the price of two. Both channels share a two-spring premium reverb pan and effects loop. An External Speaker jack and Resonance switch are included to expand your playing options on the ValveKing 112. Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Refer to the front panel diagram in this manual to locate the particular features next to its number. Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. Two footswitchable channels with independent, three-band EQ · VENTILATION: For proper ventilation, allow 24" clearance from nearest combustible surface. If both inputs are used simultaneously, the levels are the same (both are Low Gain). NOTE: Channel selection may also be achieved by using the optional remote footswitch (item #00579720). POWER SWITCH To apply power to the unit, flip the switch to the "ON" position. The red PILOT LIGHT (#17) will illuminate, indicating power is being supplied. AC POWER INLET: This is the receptacle for an IEC line cord, which provides AC power to the unit. Connect the line cord to this connector to provide power to the unit. Damage to the equipment may result if improper line voltage is used. Never break off the ground pin on any equipment. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent the risk of shock or fire hazard, always make sure that the amplifier and all associated equipment is properly grounded. NOTE: FOR UK ONLY As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings identifying the terminals in your plug, proceed as follows: (1) The wire which is colored green and yellow must be connected to the terminal which is marked by the letter E, or by the Earth symbol, or colored green or green and yellow. (2) The wire which is colored blue must be connected to the terminal which is marked with the letter N, or the color black. (3) The wire which is colored brown must be connected to the terminal which is marked with the letter L, or the color red. [. . . ] For example, two 16 enclosures necessitate an 8 setting, while two 8 enclosures would require a 4 setting. NOTE: At any front panel settings, adjust the TEXTURE (#21) knob on the rear of the unit to attain the desired level of power amp distortion, harmonics and power sensitivity. Push Gain: Increase Gain in Lead channel and introduces a tighter low end response Push Volume: +3-5dB Volume boost (more effect at midway Lead Volume settings) Special 2-button unit with LED indicators (#00579720) for channel selection (Channel) and a special preset Volume Boost and/or Gain Boost function selectable via the front panel GAIN (7) and VOLUME (10) switches described above (BOOST) Features and specifications subject to change without notice. Push Ganancia: Increase Ganancia en el canal Lead e introduce una respuesta de acabado en baja What This Warranty Does Not Cover The Warranty does not cover: (1) damage caused by accident, misuse, abuse, improper installation or operation, rental, product modification or neglect; (2) damage occurring during shipment; (3) damage caused by repair or service performed by persons not authorized by Peavey; (4) products on which the serial number has been altered, defaced or removed; (5) products not purchased from an Authorized Peavey Dealer. [. . . ]