User manual PEAVEY AUTO-MATCH II

[. . . ] It is high (3. 8 V) when channel is not active. Power Consumption: AC 120 volts, 60 Hz - Domestic AC 230 volts, 50/60 Hz - Export 15 watts Weight: 10. 8 lbs Dimensions: 3-1/2" H x 17" W x 10-1/8" D FEATURES Channel Features: · Switchable low cut filter (-3 dB at 75 Hz) · Switchable phantom power (12 V) · Switchable manual or automatic operation · Switchable mutebus (all attached channels can be muted externally) · Transformer balanced mic and line inputs · Adjustable priority (Channels 1 & 2) · Signal processor loop (Channels 1 & 2) · External muting capability · Direct outputs · Activity logic output (status) TM ® ® ARCHITECTURAL ACOUSTICS® General Features: · Three sweepable notch filters · Downward expander · Transformer balanced output · Easily linked to created 16, 24, 32. . . channel mixer · Remote volume capability · Plexiglass security panel · Rack-mount or stand alone package (rack brackets are optional) provides a gain trim control, three sweepable notch filters, a downward expander, a transformer balanced output, and a remote volume port. [. . . ] channel mixer · Remote volume capability · Plexiglass security panel · Rack-mount or stand alone package (rack brackets are optional) provides a gain trim control, three sweepable notch filters, a downward expander, a transformer balanced output, and a remote volume port. The Automix has been designed so that multiple units can easily be linked together to form a single mixer with many more inputs (16, 24, 32. . . ). The Automix is supplied with a plexiglass security panel to prevent changes to the installer's settings. The Automix is packaged as a stand-alone unit, but will also rack-mount into a standard 19" rack with optional rack-mount kit. muting capability, activity/clipping LED and a status (logic) output. Channels 1 and 2 shall have a signal processor loop and priority controls. The master section shall have its own level controls, as well as controls for the notch filter and the downward expander. External muting, remote volume, and the linking of multiple units shall be accomplished through barrier strip connections on the back of the unit. If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered. ) "Original purchaser" means the customer for whom the product is originally installed. Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States and Canada. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. [. . . ] THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. [. . . ]