User manual PEAVEY AUTOMATE

[. . . ] (11 kg) Color: Black Features · Up to five input channels · One electronically balanced Mic/Tel input ­ telephone input with 600 Ohm transformer balanced for paging · One electronically balanced Mic/Line input · Two electronically balanced Line inputs Architectural and Engineering Specifications The mixer/amplifier shall have 4-inputs and an accessory module port for use with present and future Peavey MMA modules. The front panel shall include four input level controls, bass and treble controls, and a master output control. Front panel indicators shall include power, signal presence at the amplifier, channel signal and mute condition, and SPSTM. [. . . ] The mixer amplifier shall have a hierarchical muting function where the input module has the highest priority followed by Channel 1. Outputs shall include one direct and three transformer-balanced. The power switch shall be on the rear panel along with the detachable IEC cord, fuse holder, and accessory power outlet (120 V only). There shall be four inputs with Euro-type connectors on the rear panel and level controls on the front panel. Channel 1 shall also include an XLR connector and have a bridging transformer input with switchable input sensitivity between telephone paging and microphone. When in the microphone mode, 24 Volt phantom power shall be applied to the Input 1. Channel 2 shall be electronically balanced with a switchable input sensitivity between mic and line levels. When the switch is in, the channel cannot be muted. Description The AUTOMATE is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility in application, this mixer/amp represent the latest, state-of-the-art technology in analog circuit design. Powerful, yet easy to use, the new AUTOMATE delivers amazing sonic performance. Low-noise design and features applicable to "real-world" situations makes this unit ideal for audio applications where a compact, powered mixer with multiple input and output capabilities are required. Specifications UMATM 752 MIXER/AMPLIFIER The mixer amplifier shall have a direct 4 Ohm output, and 3 transformer-balanced outputs ­ 100 Volt, 70 Volt, and 8 Ohm. The amplifier shall include clipping protection via SPSTM. The unit shall be called the Peavey Architectural Acoustics Division model AUTOMATE. The master section shall include front panel bass and treble EQ controls, each with a ±10 dB range of operation. A front panel master level control shall control the output signal level of the preamp/mixer. [. . . ] A front panel master level control shall control the output signal level of the preamp/mixer. The capability to insert an external device shall be included via two RCA jacks. A loop switch shall bypass the loop point. [. . . ]