User manual PEAVEY AXCELERATOR 5

[. . . ] at 100 Ohms Power in: Tone controls: Bass: Treble: ±10 dB at 100 Hz ±10 dB at 10 kHz Front panel controls and indicators: Channel 1 level control Channel 2 level control Channel 3 level control Channel 4 level control Specifications UMATM 352 MIXER/AMPLIFIER · Two electronically balanced Line inputs · One plug-in module port allows for any single-space MMATM module · Rear-panel input level control for optional MMA input module · Priority/Muting system with internal signal override, external switch closure capability, threshold control, and front panel indicators · Mute Bus Active/Defeat switches on two channels · Remote volume control capability · Bass and treble equalization controls · Preamp output and power amp input loop for external processing equipment or auxiliary output · Channel 4 electronically balanced output provides non-mutable output for MOH · Front panel channel input signal level indicators · Amplifier signal indicator · SPSTM (Speaker Protection System) circuitry with indicator · Power indicator · 4 Ohm direct output · 8 Ohm, 70 Volt, and 100 Volt transformer-balanced power outputs · AC convenience outlet (120 V units only) · Optional rack mounting with included rack ears Applications · · · · · · · · · · · Presentation rooms Board rooms Courtrooms Auditoriums Lecture halls Meeting rooms Convention centers Paging systems Background music Retail spaces Restaurants Architectural and Engineering Specifications The mixer/amplifier shall have 4-inputs and an accessory module port for use with present and future Peavey MMA modules. The front panel shall include four input level controls, bass and treble controls, and a master output control. Front panel indicators shall include power, signal presence at the amplifier, channel signal and mute condition, and SPSTM. [. . . ] Front panel indicators shall include power, signal presence at the amplifier, channel signal and mute condition, and SPSTM. The mixer amplifier shall have a hierarchical muting function where the input module has the highest priority followed by Channel 1. Outputs shall include one direct and three transformer-balanced. The power switch shall be on the rear panel along with the detachable IEC cord, fuse holder, and accessory power outlet (120 V only). There shall be four inputs with Euro-type connectors on the rear panel and level controls on the front panel. Channel 1 shall also include an XLR connector and have a bridging transformer input with switchable input sensitivity between telephone paging and microphone. When in the microphone mode, 24 Volt phantom power shall be applied to the Input 1. Channel 2 shall be electronically balanced with a switchable input sensitivity between mic and line levels. A front panel master level control shall control the output signal level of the preamp/mixer. Bass control Treble control Master level control Input channel signal level indicators: (signal presence = green; signal peak = red) Input channel mute status indicators Power amplifier signal presence indicator SPSTM indicator Power on indicator Rear panel controls: Module input level control (Use with MMATM input modules only) Channel 1 sensitivity switch Channel 1 mute bus assign switch Mute 2 threshold control Channel 2 sensitivity switch Channel 2 mute bus assign switch Channel 4 output level control Loop switch Power switch Muting: Mute 1: MMA input module overrides Ch 1 through 4 Mute 2: Ch 1 overrides Ch 2 through 4 with adjustable threshold control range from OFF to 100 mV (TEL) or 1 mV (MIC) Other features: Remote volume control (RVC) via screw terminals · 10 k Ohms approximately 30 dB attenuation · 100 k Ohms approximately 60 dB attenuation Mute 1 and mute 2 bus activation with switch contact closure via screw terminals 24 V DC phantom power on MIC inputs Power requirements: 100 Watts, 120 V AC, 60 Hz Dimensions: 19" x 13. 25" x 3. 45" with rack ears (483 mm x 337 mm x 88 mm) 17" x 13. 25" x 3. 45" without rack ears (432 mm x 337 mm x 88 mm) Weight: 20. 0 lbs. (9 kg) Color: Black Features · Up to five input channels · One electronically balanced Mic/Tel input ­ telephone input with 600 Ohm transformer balanced for paging · One electronically balanced Mic/Line input Description The AXCELERATOR 5 is a high quality, commercial grade analog audio mixer/amplifier. Designed for flexibility in application, this mixer/amp represents the latest, state-of-the-art technology in analog circuit design. Powerful, yet easy to use, the new AXCELERATOR 5 delivers amazing sonic performance. Low-noise design and features applicable to "real-world" situations makes this unit ideal for audio applications where a compact, powered mixer with multiple input and output capabilities are required. Specifications UMATM 352 MIXER/AMPLIFIER The mixer amplifier shall have a direct 4 Ohm output, and 3 transformer-balanced outputs ­ 100 Volt, 70 Volt, and 8 Ohm. The amplifier shall include clipping protection via SPSTM. The unit shall be called the Peavey Architectural Acoustics Division model AXCELERATOR 5. Warranty Three + two limited warranty Note: For details, refer to the warranty statement. [. . . ] The unit shall be called the Peavey Architectural Acoustics Division model AXCELERATOR 5. Warranty Three + two limited warranty Note: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ]