User manual PEAVEY B-NINETY PASSIVE

[. . . ] The AUX input is accessible via screw terminals or RCA jacks. Bass and treble controls are functional on the total system (mic/page/AUX). [. . . ] This feature is internally defeated when required. Twenty-five and seventy volt line output capability is standard equipment, and the unit is packaged for shelf or wall mounting convenience. The user-friendly control layout, coupled with stateof-the-art circuit design, ensures reliable long-term operation and smooth trouble-free installation. S/N Ratio (22 kHz BW): Tone controls flat/input control max: 85 dB Aux 58 dB Mic/Page Other Features: Mic/Page input has precedence over the AUX input (defeatable) FEATURES ¥ 35 watts into 4 ohms ¥ Mic/page inputs (screw terminals) ¥ Mic/page select switch ¥ Dedicated program input (screw terminals and RCA jacks) ¥ Bass and treble controls ¥ Mic/page level controls ¥ Direct 4 ohm output (screw terminal) ¥ Completely isolated 8 ohm, 600 ohm, 25 volt and 70 volt outputs (screw terminals) ¥ Shelf-top or wall-mountable chassis Tone Controls: Bass ± 10 dB @ 100 Hz Treble ±10 dB @ 10 kHz Inputs: AUX Input: Dual RCA phono jacks, summed Mic/Page Input: Screw terminal input switchable between mic/page WALL OR SHELF MOUNTING The B-NINETY PASSIVE can be mounted on a vertical or horizontal surface using the brackets formed on the bottom panel. For mounting on a wooden or paneled surface, use No. For mounting onto a masonry or drywall type surface, use fasteners that are designed for this purpose. ¨ ARCHITECTURAL ACOUSTICS® Input Sensitivity: AUX Input: 100 mV @ 10K Mic Input: 1 mV @ 1K Page Input: 120 mV @ 5K Outputs: 4 ohms, 8 ohms, 600 ohms, 25 V, 70 V Output Regulation: Less than 0. 5 dB, no load to full load Controls: 1 AUX input gain control, 1 mic/page gain control, 1 bass control, 1 treble control, 1 mic/page select switch DESCRIPTION The UAª 35T II is a high quality utility amplifier ideally suited for varying installation requirements. It produces 35 watts into 4 and 8 ohm direct connections plus a B-NINETY PASSIVE ARCHITECTURAL AND ENGINEERING SPECIFICATIONS The mixer amplifier shall have one switchable microphone/paging channel and one dedicated auxiliary channel. Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT, AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. Peavey's liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action, is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. [. . . ] This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. For information on service under this warranty, call a Peavey customer service representative at (601) 483-5376. TM ¨ ¨ ARCHITECTURAL ACOUSTICS® Features and specifications subject to change without notice. [. . . ]