User manual PEAVEY BACKSTAGE

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding plug. The wide blade or third prong is provided for your safety. [. . . ] Ear plugs or protectors to the ear canals or over the ears must be worn when operating this amplification system in order to prevent a permanent hearing loss, if exposure is in excess of the limits as set forth above. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels such as this amplification system be protected by hearing protectors while this unit is in operation. The Backstage, one of the hottest little guitar amplifiers around, offers a great big sound in a small light-weight package. Its design makes it perfect for a practice amplifier or those small jam sessions. With built-in headphone connection and reverb, this little amp will provide years of reliable fun. Before you begin to play through your amplifier, it is very important to ensure the product has the proper AC line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the unit. Refer to the front panel diagram in this manual to locate the particular features next to their number. Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. 10 Watts RMS into 8 Ohms @ 10% THD, 1 kHz, 120 VAC line Domestic: 26 Watts, 60 Hz, 120 VAC Export: 26 Watts, 50/60 Hz, 230­240 VAC (Clean channel, 20 Hz­20 kHz unweighted) Greater than 70 dB below rated power The following specifications are measured @ 1 kHz with the controls preset as follows: Impedance: High Z, 22 k Ohms Nominal Input Level: -4 dB, 600 mV RMS Nominal Output Level: 25 mV into 4 Ohms (Disconnects internal speaker when used) Use this 1/4" jack to connect your guitar. Connect your guitar prior to turning power on to the amplifier. This knob allows control over the level of overdrive. The Overdrive On/Off (3) switch must be depressed or engaged for you to hear overdrive. Once engaged, look out, this little amplifier will rock. [. . . ] How To Get Warranty Service (1) Take the defective item and your sales receipt or other proof of date of purchase to your Authorized Peavey Dealer or Authorized Peavey Service Center. Include a detailed description of the problem, together with a copy of your sales receipt or other proof of date of purchase as evidence of warranty coverage. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. [. . . ]