User manual PEAVEY CLASSIC 60-60

[. . . ] phone jack and 1x Neutrik® NL4 Speakon® (bi-amp only) Crossover frequency (internal passive): Low Frequency - High Frequency: 1, 400 Hz Enclosure materials and finish: 3/4" OSB finished in black carpet Recommended active crossover frequency region and slope: Low Frequency - High Frequency: 1, 600 Hz at 12 dB/octave Mounting provisions: This unit is not designed for overhead suspension. Radiation angle measured at -6 dB point of polar response: 80 degrees horizontal by 40 degrees vertical Time offset: Low Frequency: High Frequency: delay 0. 69 ms 0. 00 ms Dimensions (H x W x D): Front: 49. 25 in. 1251 mm x 543 mm x 584 mm Rear: 49. 25 in. 1251 mm x 356 mm x 584 mm Net weight: 139 lbs. [. . . ] 1251 mm x 356 mm x 584 mm Net weight: 139 lbs. (63. 2 kg) Features · 2, 000 W program, 4000 W peak · SoundGuardTM 44 tweeter protection · Two 15" BWX Black Widow® 4" VC woofers · 44XTTM 4" titanium compression driver · Trapezoidal enclosure design · Built-in pocket casters for easy transport Description The latest version of the SPTM 7 has the new BWX high power Black Widow woofers incorporated, as well as a very nice looking cabinet design. The CLASSIC 60-60 is a quasi three-way speaker system comprised of a pair of 15" Black Widow BWX woofers with Kevlar® impregnated cones, and a 44XT compression driver loaded onto a CH 7 constant directivity horn. The CLASSIC 60-60 has a trapezoidal shaped enclosure, which reduces the build-up of standing waves inside the enclosure, which minimizes mid-bass and mid-range colorations due to the cabinet. It is constructed of 3/4" OSB and is covered with a durable black carpet. The enclosure corners are reinforced with polymer caps, and a black powder-coated expanded metal grille covers the lower portion of the system to protect the woofers from external damage. Built-in pocket casters on the rear bottom edge ease transport when smooth flooring or paved areas are present. The quasi three-way system consists of a pair of 15" Black Widow BWX woofers with Kevlar impregnated cones, and a water-resistant treated cone and dust cap for superior environmental stability. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available. Amplitude Response (1W 1m On-Axis) 110 dB SPL (re 20 Pa) 100 90 80 70 60 20 Switch Position Normal EQ 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Figure 1 Impedance 100 50 30 20 Z ( ) 10 5 3 2 1 20 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Figure 2 Mounting This unit is not designed for overhead suspension. Architectural and engineering specifications The loudspeaker system shall have an operating bandwidth of 50 Hz to 19 kHz. The nominal output level shall be 99. 0 dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 4. 0 Ohms. The maximum continuous power handling shall be 1, 000 Watts, maximum program power of 2, 000 Watts and a peak power input of at least 4, 000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 80 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 49. 25 inches high by 21. 38 inches wide by 23. 00 inches deep. [. . . ] The nominal radiation geometry shall be 80 degrees in the horizontal plane and 40 degrees in the vertical plane. The outside dimensions shall be 49. 25 inches high by 21. 38 inches wide by 23. 00 inches deep. The loudspeaker system shall be a Peavey model SPTM7X. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. [. . . ]