User manual PEAVEY DPC 750

[. . . ] It is constructed of premium 18 mm poplar plywood and is covered with a tough, durable, black textured Hammer Head polyurethane coating. A 16-gauge, powder-coated, perforated metal grille covers the front of the system to protect the speakers from external damage. The 15" Pro Rider woofer features a Kevlar® impregnated, water-resistant treated cone and dust cap for superior environmental stability. [. . . ] The 15" Pro Rider woofer features a Kevlar® impregnated, water-resistant treated cone and dust cap for superior environmental stability. A 44XT 4" titanium diaphragm compression driver handles the high frequencies and features the Radialinear Planar Phase Correction System (US Patent 6, 064, 745), which provides smoother and extended high frequency response. Its CH6 conical constant directivity horn provides an even 60° coverage in all directions. QWTM-Monitors PRILIMINARY Full range input to the system is made via two four pin Neutrik jacks in parallel. A secondary input location is provided so that either side of the unit may be connected to the amplifier or another monitor used in parallel. A four pin Neutrik switching jack is provided for biamp input flexibility while maintaining superior signal integrity. The inclusion of a standard four pin Neutrik jack in parallel on the driver side of the biamp switching jack provides for daisy chaining to another cabinet when biamp operation is desired. The internal passive crossover features the Sound Guard 44 high frequency driver protection circuit and an advanced topology crossover with high performance components to provide high power handling and reliability. This proprietary, high frequency driver protection circuitry provides long- and medium-term driver overload protection without impairing musical transients or dynamics. Mounting Caution: This loudspeaker system is not designed for overhead suspension. An SA1 stand adapter is included on the woofer side of the enclosure to facilitate standmounting for use in a public address application. Architectural and engineering specifications The loudspeaker system has an operating bandwidth of 67 Hz - 18 kHz, with a nominal output level of 97. 0 dB when measured at a distance of 1 meter with an input of 1 Watt. The QW Monitor's maximum continuous power handling is 1, 000 Watts, with 2, 000 Watts maximum program power and a peak power input of at least 4, 000 Watts, plus a minimum amplifier headroom of 3 dB. The nominal radiation geometry is 60° in the horizontal plane and 60° in the vertical plane. The outside dimensions are 17. 75" high by 29. 75" wide by 21. 25" deep. The QW-Monitor weighs 85 lbs. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ] The outside dimensions are 17. 75" high by 29. 75" wide by 21. 25" deep. The QW-Monitor weighs 85 lbs. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ]