User manual PEAVEY EVH WOLFGANG

[. . . ] For as long as I've been playing guitar, I've always been searching for a certain feel and tone. I've experimented by tearing apart and reassembling hundreds of guitars in different ways searching for these qualities. Although I've ruined a lot of great guitars by having done this, I have learned what it takes to make a truly great guitar. The Wolfgang®, after years of trial and error, (for me) is that guitar. [. . . ] To gain access to the spring tension screws and spring claw, remove the spring cover on the back of the guitar. per Edward's specification , the tremolo system is adjusted to rest on the body surface for maximum sustain and tonality. This will only allow the strings to be dropped below pitch. This also ensures tuning stability when using the D-TunerTM or when a string breaks. The instrument is equipped with two springs, which allow proper tension for the string gauge supplied with the guitar. The extra spring is enclosed should you prefer to use a heavier string gauge. Proper tremolo tension is achieved when the bottom of the tremolo bridge plate rests on the top surface of the guitar body without requiring excessive force to depress the tremolo arm. This instrument should be tuned to proper pitch (A-440) before and after making adjustments. If the floating tremolo style is desired, it is recommended that you remove the D-Tuner, as its operation causes a change in string tension that will affect the tuning of the other strings. An extra string lock bolt is enclosed in the case, should the D-Tuner be removed. Extreme care should be taken when installing and removing these springs. The tremolo arm is inserted and screwed into the tremolo arm socket on the bridge plate. This assembly can be adjusted to control the amount of torque required to rotate the tremolo arm. Some players prefer the tremolo arm to stay in place when used. This can be accomplished by using the supplied 12mm wrench to hold the top of the tremolo arm socket while screwing the tremolo arm firmly into place. If you prefer to have the tremolo arm swing freely, loosen the nut on the bottom of the tremolo arm socket. This is accessible through the tremolo spring pocket. Edward prefers an extremely loose feel, allowing approximately one inch of play before the tremolo is actuated. This adjustment accommodates Edward's particular playing style. It allows him to hold onto the tremolo arm while picking without moving the tremolo until needed. This allows string height from the body to be consistent with the tremolo bridge version of the guitar. The height of the classic tune-o-matic style bridge may be adjusted by using the supplied 2. [. . . ] This Limited Warranty shall not extend to or cover guitar strings. Service work may be performed by any Peavey Authorized Service Center or, if the service center is unable to provide the necessary warranty service, you will be directed to the nearest Peavey Authorized Service Center which can provide such service. You may return the guitar, postage prepaid and insured, along with a description of the problem, proof of purchase, and a complete return address to: If the defect is remedial under this warranty, and the other terms and conditions expressed herein have been complied with, Peavey will repair or replace the product and return it, freight collect, to the purchaser. other than the postage and insurance requirement , no charge will be assessed for such repair or replacement. [. . . ]