User manual PEAVEY EXPRESS 112

[. . . ] Illuminates when AC power is being supplied to the amp. The red pilot light (LED) will illuminate indicating power is being supplied to the unit. M For your safety, we have incorporated a three-wire line (mains) cable with proper grounding facilities. It is not advisable to remove the ground pin under any circumstances. [. . . ] If it is necessary to use the equipment without proper grounding facilities, suitable grounding adaptors should be used. Less noise and greatly reduced shock hazard exists when the unit is operated with the proper grounded receptacles. When using remote footswitch, always insert the plug fully (second click) to insure proper operation. Dynamics @ 10 65 W RMS into 8 ohms 4 ohms not recommended Low&High @ 10 Mid @ 0 Pre & Post Gain @ 10 Gain & Thrash, Off (Out) Normal Levels are with normal volume @ 5 Minimum Levels are with normal volume @ 10 (20 Hz to 20 kHz unweighted) 68 dB below rated power Greater than 78 dB below rated power Lead Channel Defeat (when selected with button) Reverb Defeat The following specs are measured @ 1 kHz with the controls preset as follows: Afin d'assurer un bon fonctionnement lors de l'utilisation de l'interrupteur au pied, inserez la fiche a fond jusquau second cran (au second clic). For further information on other Peavey products, ask your Authorized Peavey Dealer for the appropriate Peavey catalog/publication: Bass Guitars Guitars Bass Amplification Guitar Amplification Sound Reinforcement Enclosures Microphones Keyboards 00 or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. such purchase pnce will be that in effect for the specific product when the cause of action arose. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. Peavey does not assume liability for personal injury or property damage arising out of or caused by a non-Peavey alteration or attachment, nor does Peavey assume any responsbility for damage to interconnected non-Peavey equipment that may result from the normal functioning and maintenance of the Peavey equipment. In the event of any modification or disclaimer of expressed or implied warranties, or any limitation of remedies, contained herein conflicts with appltcable law, then such modification, disclaimer or limitation, as the case may be, shall be deemed to be modified to the extent necessary to comply with such law. Never walk or place equipment on power supply cords. Periodically check cords for cuts or signs of stress, especially at the plug and the point where the cord exits the unit. The power supply cord should be unplugged when the unit is to be unused for long periods of time. If this product is to be mounted in an equipment rack, rear support should be provided. Metal parts can be cleaned with a damp rag. The vinyl covering used on some units can be cleaned with a damp rag or an ammoniabased household cleaner if necessary. Disconnect unit from power supply before cleaning. Care should be taken so that objects do not fall and liquids are not spilled into the unit through the ventilation holes or any other openings. This unit should be checked by a qualified service technician if: a. [. . . ] This unit should be checked by a qualified service technician if: a. Anything has fallen or been spilled into the unit. The unit has been dropped or the enclosure damaged. The user should not attempt to service this equipment. [. . . ]