User manual PEAVEY FORUM PLUS

[. . . ] magnet · 14XTTM titanium diaphragm compression driver with 1. 4" titanium diaphragm · 400 Watts program/800 Watts peak power handling · Crossover network for driver protection and EQ · High frequency driver protection · 90° x 40° coverage constantdirectivity horn for better offaxis tonality · Lightweight trapezoidal enclosure Frequency range (-10 dB, half space): 49 Hz to 21 kHz Sensitivity (1 Watt/1 meter): 97 dB Power rating (program): 400 Watts Power capacity (peak): 800 Watts Transducer complement: Heavy duty 15" woofer with 2 3/8" voice coil and 50 oz. magnet, 14XTTM 1. 4" titanium diaphragm dynamic compression driver Driver protection: Positive temperature coefficient resistor Nominal coverage pattern: 90° x 40° SPECIFICATIONS · Durable plastic injection-molded enclosure · Heavy duty steel grille · Molded-in pole mount · Top and bottom flying point inserts Description The FORUM PLUS is a two-way sound reinforcement system consisting of a heavy duty 15" woofer and a 14XTTM titanium diaphragm, dynamic compression driver mounted on a 90° x 40° coverage constantdirectivity horn. [. . . ] magnet, 14XTTM 1. 4" titanium diaphragm dynamic compression driver Driver protection: Positive temperature coefficient resistor Nominal coverage pattern: 90° x 40° SPECIFICATIONS · Durable plastic injection-molded enclosure · Heavy duty steel grille · Molded-in pole mount · Top and bottom flying point inserts Description The FORUM PLUS is a two-way sound reinforcement system consisting of a heavy duty 15" woofer and a 14XTTM titanium diaphragm, dynamic compression driver mounted on a 90° x 40° coverage constantdirectivity horn. The lightweight-yet-rugged injection-molded plastic enclosure with molded-in stand-mount cup facilitates portable use for live music or speech sound. A black powder-coated steel grille provides driver protection and a professional appearance. The FORUM PLUS speaker system is rated at 400 Watts program power handling, and the full crossover network includes high voltage film capacitors and high frequency driver protection for clear, punchy sound and excellent long-term reliability. Two 1/4" phone jack input connectors make daisy-chaining to other speakers simple. Caution: Before attempting to suspend the FORUM PLUS consult a certified structural engineer. The four insert groupings include a top group and a bottom group, but some models have an additional group of four on the rear plane of the cabinet. Maximum enclosure angle from vertical hang: 30° When mounting or flying, you must use a suitable safety chain or wire rope to secure the speaker loop this through the top handle and firmly attach to a suitable structural member as indicated by a certified structural engineer. The recommended range of torque for the mounting bolt is 3 to 3-3/4 lb. /feet of torque. If an insert spins, it has been damaged and the cabinet cannot be flown!Never transport the cabinet while mounted on an array bracket, or other mounting bracket, this may unduly stress the mounting inserts. (note to structural engineer) The end of the mounting bolt should not penetrate the cabinet more than 1/2" beyond its surface. SPECIFICATIONS PRTM 15 FORUM PLUS Input Plate SPECIFICATIONS PRTM 15 80304975 Features and specifications subject to change without notice. [. . . ] If an insert spins, it has been damaged and the cabinet cannot be flown!Never transport the cabinet while mounted on an array bracket, or other mounting bracket, this may unduly stress the mounting inserts. [. . . ]