User manual PEAVEY HV 1200 DATASHEET

[. . . ] The HV 1200 provides unmatched application flexibility with an array of optional plug-in modules, allowing each system to be tailormade for specialized installations. Input modules may be loaded in as required for varying sound reinforcement applications, number of input channels, special functions, etc. [. . . ] The program input includes a level control and is totally separate from the other eight channels. External signals may be patched in at this point as a system auxiliary input or Extended Frequency Response: High Frequency 20-20 kHz ±1 dB THD: Compression Driver 0. 05% at 1 kHz, rated output S/N Ratio: Master volume min 100 dB Master volume max 77 dB Connectors: PGM input, bridge in/out, AUX out, RCA phono jacks Ports 1-8: card edge connector 600 ohm output: screw terminals Mute: screw terminals AC line cord: SJT, 3 prong AC outlet: 3 prong Tone Controls: Bass ±10 dB @ 100 Hz Treble ±10 dB @ 10 kHz Power Consumption: 120 volts AC, 60 Hz, 15 watts Dimensions: 3. 5" H x 17" W x 7. 75" D Contour: +6 dB @ 100 Hz +6 dB @ 10 kHz Weight: 10 lbs. Inputs: Eight input ports, each accepts any input/output module; one dedicated program input (dual RCA phono jack); bridge in/out. Color: Gray Input Sensitivity: Ports 1-8: 100 mV @ 10K ohms Bridge in/out: 100 mV/3. 3K ohms PGM In: 150 mV @ 10K ohms TM ® ® ARCHITECTURAL ACOUSTICS® the ninth input channel. Signals appearing at this input are routed directly to the master summing amplifier stage and are mixed with signals from the other eight channels. Systems requiring a single input may use the program input making the purchase of an input module unnecessary. The program level control regulates the level of this input and the signal is routed through the system bass and treble controls. The HV 1200 is packaged as a standalone unit but will also rack-mount into a standard 19" rack (with optional rack-mount kit). LIMITED WARRANTY Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship. The internal amplifier shall be capable of delivering +17 dBm. The unit shall be capable of delivering rated output width system hum and noise at least 77 dB below rated power. The unit shall be a Peavey Architectural Acoustics Division Model MMATM 800T. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. UNDER NO CIRCUMSTANCES WILL PEAVEY BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF PEAVEY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THIS LIMITED WARRANTY IS THE ONLY EXPRESSED WARRANTY ON THIS PRODUCT AND NO OTHER STATEMENT, REPRESENTATION, WARRANTY, OR AGREEMENT BY ANY PERSON SHALL BE VALID OR BINDING UPON PEAVEY. Peavey's liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action, is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. [. . . ] Peavey's liability to the original purchaser for damages for any cause whatsoever and regardless of the form of action, is limited to the actual damages up to the greater of Five Hundred Dollars ($500) or an amount equal to the purchase price of the product that caused the damage or that is the subject of or is directly related to the cause of action. This limitation of liability will not apply to claims for personal injury or damage to real property or tangible personal property allegedly caused by Peavey's negligence. [. . . ]