User manual PEAVEY ILS 1594 DATASHEET

[. . . ] 90° +/- 15° 105° +/- 15° 90° +/- 15° 55° +/- 10° 70° +/- 10° 40° +/- 5° Harmonic Distortion: 1% Rated Power 2nd Harmonic: 100 Hz: 1 kHz: 1. 15% 0. 32% 1. 6 kHz - 5 kHz: Sound Pressure Level, 1 Watt, 1 Meter in Anechoic Environment: Full Range: 95. 0 dB SPL, (2. 83V input) 5 kHz - 16 kHz: 3rd Harmonic: 100 Hz: 1 kHz: 0. 26% 0. 45% dB SPL (re 20 Pa) Amplitude Response (1W 1m On-Axis) 110 100 90 80 70 60 20 10% Rated Power 2nd Harmonic: 100 Hz: 1 kHz: 100 Hz: 1 kHz: 4. 60% 1. 59% 1. 04% 0. 64% 3rd Harmonic: Crossover Frequency (internal passive): Low Frequency - High Frequency: 1, 300 Hz 50 100 200 Figure 1 500 1k Frequency (Hz) 2k 5k 10k 20k Time Offset: Low Frequency: High Frequency: 0. 00 ms 0. 31 ms Impedance 100 50 30 20 Impedance (Z): Full Range: Nominal: 8. 0 Minimum: 7. 1 Z ( ) 10 5 3 2 1 20 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Low Frequency: Nominal: 8. 0 Minimum: 7. 4 High Frequency: Nominal: 8. 0 Minimum: 6. 0 Figure 2 Input Connections: Beamwidth (Degrees) Beamwidth 360 300 180 140 100 80 60 40 30 20 Horizontal Vertical 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k 2x Neutrik® Speakon® NL4MD & 1x 5-position barrier strip Enclosure Materials & Finish: 3/4 in. poplar plywood finished in exterior grade hardened black paint Mounting Provisions: (12) 3/8"-16 threaded mounting suspension points (3 each top & bottom and 2 each sides & back). [. . . ] Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available. Architectural & Engineering Specifications The loudspeaker system shall have an operating bandwidth of 52 Hz 20 kHz. The nominal output level shall be 95. 0 dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 8. 0 Ohms. The maximum continuous power handling shall be 750 Watts, maximum program power of 1, 500 watts and a peak power input of at least 3, 000 Watts, with a minimum amplifier headroom of 3 dB. The nominal radiation geometry shall be 80 degrees in the horizontal plane and 65 degrees in the vertical plane. The outside dimensions shall be 33. 75 inches high by 19. 38 inches wide by 21. 75 inches deep. The loudspeaker system shall be an Architectural Acoustics model ILS 1594. patents 6, 059, 069 and 6, 064, 745. Frequency Response This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the ILS 1594 is measured at a distance of 1 meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the ILS 1594 combine to give a smooth frequency response from 52 Hz - 20 kHz. Harmonic Distortion Second and third harmonic distortions vs. [. . . ] All associated rigging is the responsibility of others. NOTE: For details, refer to the warranty statement. [. . . ]