User manual PEAVEY IMPULSE 1015 DATASHEET

[. . . ] 679 mm x 292 mm x 432 mm Optional Accessories: Impulse® 1015 Subwoofer Net Weight: 56 lbs. Additional Remarks: Also available in biamplified powered unit Figure 3 Q & Directivity Index 100 20 Features: · · · · · · · · · 1000W program power Sound GuardTM Black Widow® 15" premium woofer RXTM22 titanium compression driver Multiple handgrips and stand mount Peak SPL in excess of 133 dB Weather-resistant woofer and grille Top and bottom flying point inserts Molded-in horn with exceptionally smooth response and pattern control Q 10 10 Di DESCRIPTION: The Impulse 1015 is a two-way fullrange speaker system engineered to pro- 1 20 50 100 200 Figure 4 2 500 1k Frequency (Hz) 2k 5k 10k 0 20k Harmonic Distortion : 10% Rated Power 120 110 dB SPL (re 20 Pa) 100 90 80 70 60 50 20 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Figure 5 2nd Harmonic 3rd Harmonic Harmonic Distortion Second and third harmonic distortions vs. [. . . ] As shown in figure 1, the selected drivers in the Impulse 1015 8 ohm combine to give a smooth frequency response from 60Hz - 18 kHz. DIRECTIVITY: Beamwidth is derived from the -6 dB points from the polar plots (Figure 3) which are measured in a whole space anechoic environment. Q and Directivity Index are plotted for the on-axis measurement position. These are specifications that provide a reference to the coverage characteristics of the unit. These parameters provide insight for proper placement and installation in the chosen environment. The blending of the components of the Impulse 1015 8 ohm exhibit a desirable beamwidth and directivity (Figure 3 and 4) suitable for sound reinforcement applications. Harmonic Distortion : 1% Rated Power 110 100 dB SPL (re 20 Pa) 90 80 70 60 50 40 20 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Figure 6 2nd Harmonic 3rd Harmonic 3 POWER HANDLING: There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent upon having a minimum of 3 dB of amplifier headroom available. ARCHITECTURAL AND ENGINEERING SPECIFICATIONS: The 4 ohm loudspeaker system shall have an operating bandwidth of 58 Hz 18 kHz. The nominal output level shall be 99 dB when measured at a distance of one meter with an input of one watt. The nominal impedance shall be 4. 0 ohms. [. . . ] All associated rigging is the responsibility of others. THREE + TWO LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ]