User manual PEAVEY IMPULSE 115 DATASHEET

[. . . ] SPECIFICATIONS Impulse® 115 Third harmonic: 100 Hz: 0. 78% 500 Hz: 0. 58% 10% rated power Second harmonic: 100 Hz: 3. 1% 500 Hz: 2. 6% Third harmonic: 100 Hz: 2. 6% 500 Hz: 1. 2% Recommended active crossover frequency region and slope: 150 Hz at 18 dB/octave Impedance (Z): Nominal: Minimum: 8. 0 Ohms 7. 3 Ohms Input connections: 2 x four-pin Neutrik® Speakon® inputs in parallel 1 x eight-pin Neutrik Speakon input 1 x four-pin Neutrik Speakon thru (for use with eight-pin input) Enclosure materials and finish: 3/4" plywood finished with durable black HammerHeadTM polyurethane coating Mounting provisions: This unit is not designed for overhead suspension Dimensions (H x W x D): Front: 24. 5" x 21. 00" x 26. 75" 622 mm x 533 mm x 679 mm Frequency response, 1 meter on-axis, swept-sine in an anechoic environment: 35 Hz to 1. 5 kHz (±3 dB) Usable low frequency limit (-10 dB point): 27 Hz Power handling: 800 Watts continuous 1, 600 Watts program 3, 200 Watts Peak Sound pressure level, 1 Watt, 1 meter in an anechoic environment: 95 dB SPL (2. 83 Volt input) Maximum sound pressure level (1 meter): 124 dB SPL continuous 130 dB SPL peak Transducer complement: 1 x 15" vented Low Rider® 15" subwoofer Box tuning frequency: 40 Hz Harmonic distortion: 1% rated power Second harmonic: 100 Hz: 0. 78% 500 Hz: 0. 64% Net weight: 74 lbs. (33. 6 kg) Features: · New Peavey Low Rider 15" subwoofer · 1600 Watts of program power · Extremely low frequency response down to 35 Hz · Neutrik Speakon professional input connectors SPECIFICATIONS · Very compact design · Built-in speaker stand-mount · Black HammerHeadTM polyurethane coating Description The Impulse 115 incorporates the new high powered Low Rider® 15" woofer and a new compact cabinet design. [. . . ] As shown on the graph, distortion is the difference between the fundamental signal (frequency response) and the desired harmonic. For example, a distortion curve that is down 40 dB from the fundamental is equivalent to 1% distortion. Architectural and Engineering Specifications The loudspeaker system shall have an operating bandwidth of 35 Hz to 1. 5 kHz. The nominal output level shall be 95 dB when measured at a distance of 1 meter with an input of 1 Watt. The maximum continuous power handling shall be 800 Watts, with maximum program power at 1600 Watts; a peak power input of at least 3200 Watts; and a minimum amplifier headroom of 3 dB. The outside dimensions shall be 24. 5" high by 21. 00" wide by 26. 75" deep. The loudspeaker system shall be a model Impulse 115. 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. rugged and road-worthy. [. . . ] Peavey Electronics Corporation · 711 A Street · Meridian · MS · 39301 ©2001 Printed in the U. S. A. 8/02 (601) 483-5365 · FAX (601) 486-1278 · www. peavey. com [. . . ]