User manual PEAVEY MEDIAMATRIX X-FRAME 88 DATASHEET

[. . . ] Preset signal flow or "standard" setups do not limit the X-Frame88. Thus, the X-Frame88 is superior to similar DSP products that have factory configurations. [. . . ] All specifications are for an AC line input of 120 Volts rms. All output measurements are made using 600 balanced loads at +24 dBu full scale unless otherwise noted. All input measurements are made using a 40 balanced source impedance at +24 dBu full scale unless otherwise noted. All measurements are made with gain/attenuation set for unity unless otherwise noted. 5 X-FrameTM 88 Block Diagram 6 Architectural and Engineering Specifications The Peavey Architectural Acoustics X-Frame 88 shall provide eight balanced analog line inputs and eight balanced analog line outputs. It shall employ 24-bit A/D converters and 24bit D/A converters utilizing software selectable sampling rates of either 32 kHz, 44. 1 kHz, or 48 kHz. It shall have a frequency response of ± 0. 5 dB or better from 20 Hz to 20 kHz. Its total harmonic distortion shall be no more than 0. 01% from 20 Hz to 20 kHz with a +4 dBu input signal and a +4 dBu output signal, both with 20 dB of headroom. It shall have a dynamic range of not less than 106 dB A-weighted/104 dB unweighted. Input common mode rejection ratio (CMRR) shall be greater than 42 dB at any gain setting. The maximum input level without clipping shall be +30 dBu while maintaining the specified CMRR. The maximum output level shall be +24 dBu with a load of 600 or greater while still meeting the frequency response specification. The unit's gain shall be adjustable from -97. 5 dB to +30. 5 dB in 0. 5 dB steps. [. . . ] It shall be UL, CUL, CE listed and comply with FCC part 15, Class A. The unit shall be the Peavey Architectural Acoustics model X-Frame 88. 7 3 + 2 YEAR LIMITED WARRANTY NOTE: For details, refer to the warranty statement. [. . . ]