Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PEAVEY PV-1.3K. We hope that this PEAVEY PV-1.3K user guide will be useful to you.
Lastmanuals help download the user guide PEAVEY PV-1.3K.
Detailed instructions for use are in the User's Guide.
[. . . ] Hold the chassis (top and bottom) tightly and turn the instrument the right way up. Grasp the extreme top ends of the lid and lift it off by following the sequence of illustrations A, B and C. Rear / Dietro (A) Lift up Sollevare (B) Pull towards you to clear the keyboard. [. . . ] Rear / Dietro (A) Lift up Sollevare (B) Pull towards you to clear the keyboard. (C) Raise the lid, taking care not to disconnect the cables. Hold the chassis (top & Bottom) tightly and turn the instrument the right way up, lift off the top chassis as shown in the figure with care without forcing or disconnecting the cables. A) Be careful do not disconnect the cables. ENGLISH Remove the two locking plates (A) from the sides. Remove the keyboard cover (slide it through the lateral guides). Lift the cover and unscrew the three screws (A). Lift up the front panel with the keyboard cover raised. - Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1] and to the CPU [A] and amplifier [D] boards. - Check that the two jumpers JP1 e JP2 [E] are set to position "A" and that the jumper J1 [F] is set to position "A". 1) Audio/Video board PAL Audio/Video board NTSC 2) 2 buffer modules 3) 34 contacts x 7. NOTE: The jumper J1 [F] must be set on A position if the buffer modules are installed, on B position if the SIMM dram modules are intalled. - Fix the AUDIO/VIDEO Board [1] to the threaded locations of the support [B] by means of the screw [8]. - Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1] and to the CPU [A] and amplifier [D] boards. - Check that the two jumpers JP1 e JP2 [E] are set to position "A" and that the jumper J1 [F] is set to position "A". (761143) 1) Audio/Video board PAL (761152) Audio/Video board NTSC (761093) 2) 2 buffer modules (841004) 3) 34 contacts x 7. [. . . ] - Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1] and to the CPU [A] and amplifier [D] boards. - Check that the two jumpers JP1 e JP2 [E] are set to position "A" and that the jumper J1 [F] is set to position "A". (761143) 1) Audio/Video board PAL (761152) Audio/Video board NTSC (761093) 2) 2 buffer modules (841004) 3) 34 contacts x 7. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY PV-1.3K
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY PV-1.3K will begin.
