User manual PEAVEY RAZER

[. . . ] ATTENTION: Risques de choc électrique ­ NE PAS OUVRIR!ATTENTION: Afin de réduire le risque de choc électrique, ne pas enlever le couvercle. Il ne se trouve à l'intérieur aucune pièce pouvant être réparée par l'utilisateur. Confier l'entretien à un personnel qualifié. [. . . ] Reparaturen nur von qualifiziertem Fachpersonal durchführen lassen. ACHTUNG: Um einen elektrischen Schlag oder Feuergefahr zu vermeiden, sollte dieses Gerät nicht dem Regen oder Feuchtigkeit ausgesetzt werden. Vor Inbetriebnahme unbedingt die Bedienungsanleitung lesen. 2 FEATURES: · 9 channel mixing system · 20-20 kHz frequency response · Bridging input/output · Dedicated program input · Contour switch (special equalization) · Bass and treble controls · Plug in module capability · Rack-mountable or stand along package GENERAL DESCRIPTION The Architectural Acoustics MMATM 800T is a high quality mixer/preamp with nine input channels. Each channel provides a level control, and the master output section features bass and treble EQ controls (defeatable), and special equalization contour. The MMATM 800T provides unmatched application flexibility with an array of optional plug-in modules, allowing each system to be tailor-made for specialized installations. Input modules may be loaded in, as required, for varying sound reinforcement applications, number of input channels, special functions, etc. The program input includes a level control and is totally separate from the other eight channels. External signals may be patched in at this point as a system auxiliary input or the ninth input channel. Signals appearing at this input are routed directly to the master summing amplifier stage and are mixed with signals from the other eight channels. Systems requiring a single input may use the program input--making the purchase of an input module unnecessary. The program level control regulates the level of this input and the signal is routed through the system bass and treble controls. Signal level at this input in controlled by the Program level control and is fed to the Master output. The Program In may be regarded as channel "nine" without plug-in module capability. NOTE: This input is muted whenever the mute #1 line is grounded. 5 SPECIFICATIONS OUTPUT POWER: +4 dBm (rated output) +17 dBm (maximum) CONTROLS: 9 input gain controls, 1 bass control, 1 treble control, 1 contour switch, 1 master gain control, 1 power switch, 1 EQ defeat switch POWER BANDWIDTH: 40 Hz to 20 kHz, +17 dBm, > 0. 5% THD INDICATORS: Power LED Activity LED FREQUENCY RESPONSE: 20 Hz to 20 kHz ±1 dB THD: 0. 05% at 1 kHz, rated output PROTECTION: AC line fuse (external) S/N RATIO: Master Volume Min: 100 dB Master Volume Max: 77 dB CONNECTORS: PGM input, bridge in/out, AUX out: RCA phono jack Ports 1-8: card edge connector 600 ohm output: screw terminals Muting: screw terminals AC line cord: SJT, 3-prong AC outlet: 3-prong TONE CONTROLS: Bass ±10 dB @ 100 Hz Treble ±10 dB @ 10 kHz +6 dB @ 100 Hz +6 dB @ 10 kHz CONTOUR: POWER CONSUMPTION: Domestic: 120 V AC, 60 Hz, 15 watts Export: 220/230-240 V AC, 50/60 Hz, 15 watts INPUTS: Eight input ports, each accepts any input/output module; one dedicated program input (dual RCA phono jacks), bridge in/out DIMENSIONS: 3. 50" H x 17" W x 7. 75" D INPUT SENSITIVITY: Ports 1-8: 100 mV @ 10 K ohms Bridge in/out: 100 mV/3. 3 K ohms PGM In: 150 mV @ 10 K ohms WEIGHT: 10 lbs. COLOR: Gray OUTPUTS: Main: +4 dBu @ 600 ohms (balanced) AUX: +3 dBu @ 10 K ohms (unbalanced) OTHER FEATURES: Output disconnected for 5 seconds after power on TM ® Due to our efforts for constant improvements, features and specifications listed herein are subject to change without notice. 6 Block Diagram WARNING!DO NOT ATTEMPT TO INSTALL THIS UNIT WHILE IT OR ANY CONNECTING UNITS ARE POWERED ON. RISK OF ELECTRICAL SHOCK EXISTS IF ALL UNITS ARE NOT POWERED OFF DURING INSTALLATION. TO PREVENT ELECTRICAL SHOCK OR FIRE HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 7 8 For further information on other Peavey Architectural Acoustics products, ask your Authorized Peavey Sound Contractor for the appropriate Peavey Architectural Acoustics catalog/publication. The BluePrint Commercial Sound For Permanent Installations Engineered Sound Products For Permanent Installations TM ® Be sure to ask about products in the following categories: Modular Series Mixer, Mixer/Amplifiers Rack Kits for MATM Series Products Wall Mount Mixer/Amplifiers Non-powered Mixers Powered Mixers Equalizers-Analog Equalizers-Programmable Electronic Crossover/Delay Processors Power Amplifiers Loudspeaker Systems Acoustical Components Utility Amplifiers, Mixer/Amplifiers Rack Kits for UMATM Series Products Telephone Paging Zone Paging Systems Mixers and Mixing Consoles Power Amplifiers Loudspeaker Systems Microphones 9 LIMITED WARRANTY Peavey Electronics Corporation warrants to the original purchaser of this new Architectural Acoustics product that it is free from defects in material and workmanship. If within one (1) year from date of purchase a properly installed product proves to be defective and Peavey is notified, Peavey will repair or replace it at no charge. (Note: Batteries and patch cords not covered. ) "Original purchaser" means the customer for whom the product is originally installed. Damage resulting from improper installation, interconnection of a unit or system of another manufacturer, accident or unreasonable use, neglect or any other cause not arising from defects in material and workmanship is not covered by this warranty. The warranty is valid only as to products purchased and installed in the United States and Canada. THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. [. . . ] For information on service under this warranty, call a Peavey customer service representative at (601) 483-5376. 10 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. Read all safety and operating instructions before using this product. All safety and operating instructions should be retained for future reference. Obey all cautions in the operating instructions and on the back of the unit. [. . . ]