Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PEAVEY SP 112MX. We hope that this PEAVEY SP 112MX user guide will be useful to you.
Lastmanuals help download the user guide PEAVEY SP 112MX.
Manual abstract: user guide PEAVEY SP 112MXDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] phone jack and 1x Neutrik® NL4 Speakon® (biamp)
Crossover frequency (internal passive):
Low Frequency -- High Frequency: 1, 350 Hz
Enclosure materials and finish:
3/4" OSB finished in black carpet
Mounting provisions:
This unit is not designed for overhead suspension. SA 1 stand mounted adaptor
Dimensions (H x W x D):
Front: 15. 25 in. [. . . ] Ten percent (10%) of rated input power and either one percent (1%) of rated input power or one Watt, whichever is greater. Distortion is read from the graph as the difference between the fundamental signal (frequency response) and the desired harmonic. As an example, a distortion curve that is down 40 dB from the fundamental is equivalent to 1% distortion.
Frequency response
This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the SP 112 MX is measured at a distance of 1-meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the SP 112MX combine to give a smooth frequency response from 120 Hz - 14 kHz.
Mounting
Warning: This unit is not designed for overhead suspension.
Description
The SP 112MX is both a cosmetic and performance redesign of the SP 112M floor monitor loudspeaker system. This high power handling, two-way loudspeaker system is comprised of a 12" BWX woofer with a Kevlar impregnated cone and an RX22 compression driver coupled to a CH 3 constant directivity horn. This unit can be driven in full-range mode simply by plugging into one of the two 1/4" phone jacks on the input plate. A Neutrik Speakon® connector is provided as an input for biamp operation. The unique design of the enclosure allows the baffle to be angled at either 30° or 45° from the floor. The SP 112MX is constructed of 3/4" OSB and covered with Peavey's durable black carpet. A powder coated expanded metal grille covers the front of the enclosure to protect the drivers from unforeseen accidents. A stand mount adapter is also included in one of the ends of the enclosure. [. . . ] The loudspeaker system shall be a Peavey model SPTM 112MX.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PEAVEY SP 112MX
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PEAVEY SP 112MX will begin.
