User manual PEAVEY SP 2X DATASHEET

[. . . ] phone jack and 1x Neutrik® NL4 Speakon® (Biamp only) Enclosure materials and finish: 3/4" OSB finished in black carpet Mounting provisions: This unit is not designed for overhead suspension Dimensions (H x W x D): Front: 33. 25 in. 845 mm x 533 mm x 578 mm Rear: 33. 25 in. [. . . ] However, if a Peavey replacement bulb is not readily available, a Sylvannia SK3 bulb may be located at various loudspeaker or electronics parts stores. Frequency response This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the SP 2X is measured at a distance of 1-meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure 1, the selected drivers in the SP 2X combine to give a smooth frequency response from 53 Hz -- 16 kHz. Power handling There are many different approaches to power handling ratings. Peavey rates this loudspeaker system's power handling using a full-range form of the AES Standard 2-1984. Using audio band 20 Hz to 20 kHz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today's high technology music. This rating is contingent Amplitude Response (1W 1m On-Axis) 110 dB SPL (re 20 Pa) 100 90 80 70 60 20 Switch Position Normal EQ 50 100 200 500 1k Frequency (Hz) 2k 5k 10k 20k Description The SP 2X is both a cosmetic and performance redesign of the SP 2G loudspeaker system. This high power handling two-way loudspeaker system is comprised of a 15" BWX woofer with a Kevlar impregnated cone and an Rx22 compression driver coupled to a CH 941 constant directivity horn. This unit can be driven in full-range mode simply by plugging into one of the two 1/4" phone jacks on the input plate. A Neutrik Speakon connector is provided as an input for biamp operation. The trapezoidal design of the enclosure allows arrays to be constructed much more easily than it would be using a rectangular shaped box. This shape also greatly reduces the buildup of standing waves on the inside of the enclosure. This ensures a minimum of mid-bass and mid-range coloration of the reproduced sound due to the cabinet. [. . . ] Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P. O. Box 2898, Meridian, Mississippi 39301-2898. Mounting Warning: This unit is not designed for overhead suspension. [. . . ]