User manual PEAVEY SP 5XL DATASHEET

[. . . ] SPECIFICATIONS SPTM 5XL Transducer complement: Low frequency section 1x 15" SP-15825 Scorpion® Plus HO woofer High frequency section 1x . 875" exit/51 mm voice coil RXTM22 compression driver on a CD horn Box tuning frequency: Low frequency section 49 Hz Crossover frequency (internal passive): Low frequency - high frequency 1, 800 Hz Impedance (Z): Full range Nominal: Minimum: 8. 0 5. 7 Input connections: 2x 1/4" phone jack Enclosure materials and finish: 3/4" novaply finished in black carpet Mounting provisions: Warning: This unit is not designed for overhead suspension. Includes SA-1 stand-mount adapter and four large rubber feet on bottom Dimensions (H x W x D): Front 28. 00" x 18. 94" x 18. 31" 711 mm x 481 mm x 465 mm Rear 28. 00" x 13. 00" x 18. 31" 711 mm x 330 mm x 465 mm Frequency response, 1 meter onaxis, swept-sine in anechoic environment: 68 Hz to 18 kHz (±3 dB) Usable low frequency limit (-10 dB point): 52 Hz Power handling: Full range 350 Watts continuous 700 Watts program 1, 400 Watts peak Sound pressure level, 1 Watt, 1 meter in anechoic environment: Full range 99. 0 dB SPL, (2. 83 Volt input) Maximum sound pressure level (1 meter): Full range 124 dB SPL continuous 132 dB SPL peak Radiation angle measured at -6 dB point of polar response: 90° horizontal x 45° vertical Net weight: 69 lbs. [. . . ] The internal passive crossover features the Sound Guard III tweeter protection circuit, an advanced topology crossover with high performance components, to provide high power handling and reliability. Sound Guard provides longand medium-term driver overload protection without impairing musical transients or dynamics when the system is used full-range. The crossover provides driver roll-off and protection, as well as driver EQ for the woofer and horn. High quality, reliable crossover components include polypropylene capacitors and high current inductors. The optimal integration of the crossover with the selected drivers results in a smooth frequency response from 68 Hz to 18 kHz. Despite its compact dimensions, this system can put out very high sound levels. Its 700 Watts of program amplifier power provide excellent coverage and clarity. Mounting Warning: This unit is not designed for over head suspension. Architectural and engineering specifications The loudspeaker system shall have an operating bandwidth of 68 Hz to 18 kHz. The nominal output level shall be 99. 0 dB when measured at a distance of one meter with an input of 1 Watt. The nominal impedance shall be 8. 0 Ohms. The maximum continuous power handling shall be 350 Watts, with maximum program power of 700 Watts and a peak power input of at least 1, 400 Watts (minimum amplifier headroom 3 dB). [. . . ] Peavey Electronics Corporation · 711 A Street · Meridian · MS · 39301 ©2003 Printed in the U. S. A. 3/03 (601) 483-5365 · FAX (601) 486-1278 · www. peavey. com [. . . ]