User manual PEAVEY STUDIO PRO 50

[. . . ] Oki Data, PEAVEYPAGE, OkiVIEW, OkiLAN Reg. T. M. , M. D. , . , and PEAVEYCOLOR T. M. , PEAVEY Electric Industry Co. , Ltd. ; Windows, MS-DOS Reg. T. M. , Microsoft Corp. ; HP LaserJet, PCL, Reg. Hewlett Packard Company; Centronics Reg. [. . . ] The print server uses FF, LF and NF as ASCII conversion specifiers and uses the last number as an output port. The FF, LF and NF specifiers must be the last letters in the queue name. Example: LaserWriterFF, SalesColorLaserNF, ChemDeptLF2 FF Use the FF suffix at the end of the Remote Print Queue Name, before the port number. Example: queueFF2 If the last character in the print job is not a form feed, the OkiLAN 6120e appends a form feed. This form feed prompts the printer to print any partial page at the end of the job. LF Use the LF suffix at the end of the Remote Print Queue Name, before the port number. Example: queueLF2 In addition to the form feed described above, the OkiLAN 6120e inserts a carriage-return character into the print job immediately before each line-feed character. This feature is useful for printing UNIX text files. NF Use the NF suffix at the end of the Remote Print Queue Name, before the port number. Example: queueNF2 The OkiLAN 6120e inserts a carriage-return character into the print job immediately before each line-feed character. This feature is useful for printing UNIX text files. The first parameter of the PUT command is the name of the local file to PUT. The second parameter of the PUT command is the name of the file for the remote PC. In order to print the file, this second parameter must be a Remote Print Queue Name. If you do not specify the second parameter, FTP sets the remote file name to the local file name. This may produce undesirable printing results. MPUT Print multiple files. PEAVEY OkiLAN 6120e User's Guide IV - 19 TCP/IP Section 4 - Chapter 3 - TCP/IP Configuration and Printing TYPE ASCII BINARY IMAGE STRU MODE OPEN CLOSE QUIT BYE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported. Equivalent to "TYPE ASCII. " Equivalent to "TYPE BINARY. " Equivalent to "TYPE IMAGE. " Specifies file structure. Stream is the only transfer mode supported. Equivalent to QUIT. With the exception of the OkiLAN 6120e 100 series, OkiLAN 6120e print servers will allow one FTP connection. If more FTP connections are attempted, the OkiLAN 6120e will reject the connection until one of the other FTP connections is closed. [. . . ] To enter the Printer Properties menu: 1 Select a printer on the Printer Information Panel. 2 From the Printer menu, click Printer Properties, or click the Printer Properties icon, or double-click on the selected printer. Note: Modification of printer options (print quality, page setup, paper source, etc. ) is not available for Internet FAX and non-Oki printers. VII - 4 PEAVEY OkiLAN 6120e User's Guide Section 7 - OkiView 32 Status The Status screen is reached from the Printer Properties menu. This screen displays descriptive information about the printer, as well as its online/offline status and the status text displayed on the printers front panel. [. . . ]