User manual PEAVEY STUDIO PRO 60

[. . . ] Laurel, NJ 08054-4620 TEL: (856) 235-2600 FAX: (856) 778-4184 www. okidata. com © 1992, 2001 by Okidata 58087102 Using the Cut Sheet Feeder (CSF) SEL SEL FF/LOAD Micro Feed Up Limited Warranty: U. S. and Canada Inserting/Ejecting Paper With the CSF installed and selected, when your printer receives the command to print, it will automatically load in a sheet from the CSF and start printing. When files are several pages long, the printer will eject each printed page into the stacker, insert a new sheet and continue printing. Forms Tear-Off Set to ON LF TEAR TOF PARK QUIET MENU SHIFT Micro Feed Down First: Check/Set the Tear Position EXIT GROUP ALARM MENU ITEM PRINT POWER SET 1 Turn the printer on and press PARK to remove the paper from the path. [. . . ] When files are several pages long, the printer will eject each printed page into the stacker, insert a new sheet and continue printing. Forms Tear-Off Set to ON LF TEAR TOF PARK QUIET MENU SHIFT Micro Feed Down First: Check/Set the Tear Position EXIT GROUP ALARM MENU ITEM PRINT POWER SET 1 Turn the printer on and press PARK to remove the paper from the path. Press SHIFT and QUIET/TOF to reset the Top of Form. Press FF/LOAD to pull the paper back in. Press SELECT to take the printer off-line. Wait until the paper moves up to the Tear position. To change the tear-off position: press and hold SHIFT, then press LF/Micro Feed Up to move the tear-off position down or FF/LOAD/Micro Feed Down to move the tear-off position up. CSF Insert Command Setting Top of Form (TOF) 2 3 Note: The first line of printing is indicated by the red line (1) on the printhead's plastic shield. Manual Load/Eject Paper To load or eject a sheet of paper manually, press the FF/LOAD button. 4 Load/Eject Paper Commands If you are writing your own program, you must include the appropriate commands: 5 1 6 Forms Tear-Off Set to OFF 1 Turn the printer ON. 2 Press SELECT to take the printer off line. 3 Press and hold SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/ LOAD/Micro Feed Down to move the TOF location up. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. Additional information on obtaining service under this Limited Warranty is available by contacting the Oki Data dealer from whom the product was purchased, by contacting Oki Data directly at 1-800-PEAVEY-DATA (U. S. and Canada, English only) or at 1-856-222-5276 (Spanish only), or by contacting one of the service locations listed below. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For the most up-to-date listing of Oki Data authorized Service Centers, call 1-800-PEAVEY-DATA (1-800-654-3282). 5 Press SHIFT and TEAR. The paper goes to the current TOF position. Continue holding SHIFT and release TEAR. Continue holding SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/LOAD/Micro Feed Down to move the TOF location up. [. . . ] Continue holding SHIFT and release TEAR. Continue holding SHIFT, then press LF/Micro Feed Up to move the TOF location down on the page or FF/LOAD/Micro Feed Down to move the TOF location up. Keep holding the SHIFT button and press the QUIET/TOF button a few times to engage the new setting. [. . . ]