User manual PEAVEY T-1000 LT

[. . . ] The total ratings of all equipment plugged into the outlet should not exceed 15 amperes. A telephone cable using 26 AWG wire or larger must be used with this equipment. · Do not poke anything into the ventilation slots of the product. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire. [. . . ] Ensure the power socket to which the product is connected is easily accessible at all times and not obstructed. Using a power cable not intended for this product may lead to fire or electric shock. To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical equipment. If you do not connect the power cord or any other cables only as directed in the User's Guide, this may result in a fire. It is recommended that the machine is switched off prior to opening covers; otherwise there is a risk of electric shock. When the product cover is open, do not touch the fuser unit or print head as you may receive burns. If the product casing gets extremely hot or smoke, unusual smells or abnormal noises are emitted from the product, there is a risk of fire. Unplug the mains connector and contact your dealer. If the product has been knocked over or damaged, there is a risk of electric shock, fire and/or injury. Unplug the mains connector and contact your dealer. If any liquid (for example water) is allowed to enter the product, there is a risk of fire. Unplug the mains connector and contact your dealer. Oki Data will repair (or at its option, replace) at no charge, any defective component(s) of the Product for a period of one (1) year from date of purchase. To make request or claim for service under this Limited Warranty, contact your Oki Data Authorized service center or Oki Data at 1-800-PEAVEY-DATA (1-800-654-3282) or at www. okiprintingsolutions. com. The original purchaser must return the Product, shipping prepaid, in the original shipping container or equivalent to Oki Data or an authorized Oki Data service center and assume the risk of loss or damage in transit. A written receipt for the product, showing the date of purchase, dealer's name, and serial number of the Product, must accompany any request or claim for work to be performed under this Limited Warranty. This Limited Warranty shall not apply if the product has been damaged due to abuse, misuse, misapplication, accident, or as a result of service or modification by any other than an authorized Oki Data service center. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. PEAVEY DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. Except for the warranty coverage referenced above, NEITHER PEAVEY DATA NOR ITS SUPPLIERS SHALL HAVE ANY LIABILITY OR OBLIGATION TO CUSTOMER OR ANY OTHER PERSON FOR ANY CLAIM, LOSS, DAMAGE, OR EXPENSE CAUSED IN WHOLE OR IN PART, DIRECTLY OR INDIRECTLY, BY THE INADEQUACY OF ANY PRODUCTS FOR ANY PURPOSE, BY ANY DEFICIENCY OR DEFECT IN ANY PRODUCTS (WHETHER OR NOT COVERED BY ANY WARRANTY), BY THE USE OR PERFORMANCE OF ANY PRODUCTS OR BY ANY FAILURE OR DELAY IN PEAVEY DATA'S PERFORMANCE HEREUNDER, OR FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE, HOWEVER CAUSED INCLUDING, WITHOUT LIMITATION, PERSONAL INJURY OR LOSS OF BUSINESS OR PROFIT, WHETHER OR NOT CUSTOMER SHALL HAVE INFORMED PEAVEY DATA OF THE POSSIBILITY OR LIKELIHOOD OF ANY SUCH DAMAGES. [. . . ] Explosion Data Sensitivity to Mechanical Impact: Not available. Sensitivity to Static Discharge: Not available. Extinguishing Media: Water mist, foam, dry powder, CO2. Special Fire Fighting Procedures: Not Applicable. [. . . ]