User manual PEAVEY TRANSFORMER 112

[. . . ] Intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: To reduce the risk of electric shock, do not remove cover. WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or moisture. Before using this appliance, read the operating guide for further warnings. [. . . ] Footswitch The footswitch, when plugged in, works simultaneously with the front panel. Since it doesn't have in common the LED rings that the front panel has, the footswitch must do some transforming of its own. Refer to the diagrams below to see which LEDs and switches play a role in tuner use. To access the tuner function from the footswitch, press both the EFFECTS SELECT MODE button and the BANK SELECT MODE button simultaneously. the footswitch indicates that it is in Tuner Mode by dimly illuminating all four yellow bank LEDs. In the diagram below, the letters listed above the footswitch LEDs correspond to the six-strings of a six string guitar tuned to a standard tuning. Unlike the front panel, the footswitch is labeled E, A, D, G, B and E (top left to right) to aid in quick, remote tuning. These labels designate the note represented by the green LED below it. Upon striking a note, a green LED will illuminate just as the LED ring did in the front panel description. Though the green LEDs function in both guitar and chromatic tuning modes, they will respond differently. See the following section for a description of the two tuning modes. These single LEDs light up to indicate the current note being tracked. In chromatic mode, if the current note is not E, A, D, G or B the tuner will indicate the two notes which the current note falls between. See next diagram for explanation of this highlighted area. Press these two buttons simultaneously to activate the tuner from the footswitch. These two rows of LEDs form a single LED ring like those found on the front panel. The note LEDs (EADGBE) found in the Master Footswitch diagram above depict the note that the LED ring is currently tracking (see dashed line). NOTE: Four illuminated yellow LEDs and no illuminated preset (red) LEDs indicates that the tuner is waiting for a note to be played. Tuning Modes While in the Tuner Mode, press the Tap Tempo button on the front panel to toggle between the guitar and chromatic tuning modes. In other words, you don't have to select a note for your Transformer to find, it tracks the current note automatically. the note indicated (lit up) by the Transformer is the closest standard tuning note in relation to the current note being played. The Transformer will indicate whether the note is sharp or flat by strobing the illuminated LEDs right or left respectively. [. . . ] Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ]