User manual PEAVEY UNITY 2000

[. . . ] Place the second paper tray on the cabinet aligning the pins with the sockets. ES3640e MFP 15a. jpg ES3640e MFP 07a. jpg 4. Unpack the printer and remove any shipping tape. Note the location of the pins (1) on the tray. ES3640e MFP 07b. jpg 6 Step 2 Prepare the Printer. 1. Squeeze the release on the paper guides and move them apart. 2. [. . . ] 2 Bumper Brackets 3 Tie Wraps (to secure cabling) 2 Printer Brackets ES3640e MFP 13a. jpg 10 1. Unpack the stand, removing any shipping tape/ materials. ES3640e MFP 89a. jpg Stand Components: ES3640e MFP 36a. jpg The stand includes cylinders for moving the scanner shelf up and down. Use extreme caution when assembling the stand. NEVER ATTEMPT TO RAISE OR LOWER THE SHELF WITHOUT THE SCANNER BOLTED TO IT. Without the weight of the scanner on it, the shelf could rise rapidly when released, potentially causing severe injury. ES3640e MFP 33a. jpg ES3640e MFP 86. jpg ES3640e MFP TO PREVENT ANY POSSIBLE CRUSHING OF FINGERS, KEEP YOUR HANDS AWAY FROM THE POSTS AT THE BACK OF THE SCANNER STAND WHEN MOVING THE SCANNER SHELF DOWN. · Scanner Support Shelf (1) · Stand Frame with Posts (2) · Two Legs with Casters (3) ES3640e MFP 90a. jpg ES3640e MFP 85c. jpg 11 2. Attach the legs with casters to either end of the frame, using the eight leg bolts. 5. Place the scanner shelf on the frame and secure it in place using four of the medium screws. ES3640e MFP 89a. jpg NEVER ATTEMPT TO RAISE OR LOWER THE SHELF WITHOUT THE SCANNER BOLTED TO IT. ES3640e MFP 92. jpg 3. Place the foam bumpers in the brackets and attach the two brackets to the stand using the medium screws (two per bracket). ES3640e MFP 86. jpg Important! Do not lower the shelf until you have placed and secured the scanner on the shelf. ES3640e MFP 34. jpg 4. Unpack the plate lock mechanism. ES3640e MFP 36. jpg ES3640e MFP 35. jpg ES3640e MFP 37. jpg 12 6. Important! Make sure the plate lock mechanism cables are not twisted or kinked. 8. Pull the safety lever (1) back and hold it while feeding the plate (2) through the channel. scan_stand_2_crop. jpg 7. Connect the scanner power cable (see "Accessories in Printer Box" on page 5) to the 17 scanner power supply. then connect the other end to the power strip. 7. Secure the DCD cable to the top back of the shelf using one of the cable clips and one of the medium screws ("Accessories in Scanner Box" on page 15). ES3640e MFP 57a. jpg ES3640e MFP 107 crop. jpg ES3640e MFP 48. jpg 6. Uncoil the DCD cable and mount the ferrite cores (1) on either end of the USB data cable, next to the ferrite cores built into the cable (cable and ferrite cores are supplied in the scanner box: see page 15), then attach the DCD cable lines to the back of the scanner. Use the tie wraps to attach the scanner power supply cable to the DCD cable in two places. ES3640e MFP 49. jpg ES3640e MFP 102. jpg 18 Step 6 Attach the Printer to the Stand 1. Mount the brackets on the back of the printer: a. Remove the two screws shown in the illustration from the back of the printer. Fire Hazard Warning Icon. jpg Be sure to use the 15A AC power cord supplied with the printer. Use of a power cord NOT supplied with this printer, or an extension cord, may result in overheating, and could be a safety hazard. 2. Connect the printer power cord (supplied in the printer box) to the printer. ES3640e MFP 29. jpg ES3640 e MFP 30a. jpg b. Use two small screws at the top and one long screw at the bottom of each bracket (see "Accessories in the Stand Box" on page 10). Important!! ES3640e MFP 30 crop. jpg Do not connect this product to an uninterruptible power supply (UPS). For further information please contact Oki Data at 1-800-PEAVEYDATA . 19 3. [. . . ] Place the open core about 1 inch from the cable connector on the printer end. ES3640e MFP 03d. jpg ES3640e MFP 68. jpg 2. Insert the main power cord into the power strip, then connect it to a suitable 120-volt grounded outlet. ES3640e MFP 58. jpg c. Press the two halves of the core together until they click shut. 21 3. Connect the ferrite core end of the Ethernet cable to the printer, then connect the opposite end to the network. Install the Software See the Software Install Guide and CDs supplied with the printer. Test the Scan and Print Function ES3640e MFP 64 Right. jpg ES3640e MFP Basic System 1. [. . . ]