User manual PEG PEREGO VIAGGIO CONVERTIBLE

[. . . ] E N• Spare parts available in different colours to be specified when ordering. Product Characteristics Group 1 “Universal” category car seat • Approved under European standard UN/ECE R44/04 for children weighing from 9 to 18 kg (from 1 to 4 years approx). € Suitable for installation on the majority of vehicle seats, but not all. € The car seat can be correctly installed if the vehicle's use and maintenance manual indicates compatibility with “Universal” Group 1 restraint systems. [. . . ] € Do not use this car seat after five years from the date of production indicated on the structure. The natural ageing of the materials may mean that it is no longer compliant with standards. € Do not use accessories that are not approved by the manufacturer or by the competent authorities. 1• Place the Viaggio1 Duo-Fix car seat on the vehicle’s seat, facing in the normal direction of travel of the vehicle, as shown in the figure. The car seat is equipped with a protective base. Do not remove it when fitting the car seat with the safety belts. 2• To make it easier to pass the vehicle’s safety belts through the back of the car seat, it is necessary to recline the seat to the lowest position by operating the lever, as shown in the figure. 3• Pass the vehicle’s safety belt between the frame and the shell of the car seat. 4• The lap belt must pass through the low slots marked in red. Fasten the belt, ensuring that it clicks into place. 5• The figure shows Viaggio1 Duo-Fix fitted in a vehicle. To change from a higher position to a lower one: pull the strap in the upper central part of the headrest upwards and, at the same time, push the headrest down to the desired position. When you have finished, try moving the headrest to check it is properly attached. 2 3• When the straps are positioned correctly, the child’s shoulders will be just below the point where the straps pass. 2 4• IMPORTANT: The straps must not be too high or too low with respect to the child’s shoulders. 2 5• The Viaggio1 Duo-Fix car seat can be inclined in 4 different positions, both when it is attached to the base and when it is attached to the Isofix Base 0+1. To incline the car seat, press the lever underneath (fig. A) and pull it towards you into the required position (fig. € To release the Viaggio1 Duo-Fix car seat from the Isofix Base 0+1, press the same lever in the same way (See Point 10). How to adjust the height of the head rest How to put the child in the Viaggio1 Duo-Fix car seat 1 4• Before sitting the child on the stroller, release the safety harness by pushing the red button in the buckle of the leg divider strap. 15• Lift the safety harness and attach the buckles to the elastics in the sides. 16• Sit the child in the stroller and adjust the safety straps round the child’s shoulders and waist, as shown in the picture. [. . . ] Cleaning and maintenance must only be carried out by adults. € Keep all moving parts clean and if necessary lubricate them with light oil. € Clean the plastic parts periodically with a damp cloth. do not use solvents or similar substances. [. . . ]