User manual PEG PEREGO VIAGGIO SUREFIX

[. . . ] E N•The child is secured by means of the safety belt of the car. The child seat simply leans against the car seat. E N•The child is secured by means of the safety belt of the car. The child seat is fixed in place with the ISOFIX connectors of the car. [. . . ] The product supplied in its original packaging is ready for use and does not require specific assembly operations. 3• Lift the backrest of the child seat until you hear it click (Fig. The backrest can move between the two locks, as indicated in figure B. 4• The headrest can be adjusted in 6 positions. Lift the handle on the rear 24 2_ Components of the product of the backrest and position it at the desired height. IMPORTANT: as the child grows, it is necessary to adjust the height according to the stature of the child. IMPORTANT: after completing the operation, try moving the headrest to verify that it is correctly fitted in place. 5• Viaggio2/3 is fitted with two lateral and removable drink holders. 6• Viaggio2/3 is fitted with a reclination system that guarantees maximum comfort. To recline the seat, pull the handle on the front and simultaneously lift the seat. 7• If possible, recline the car’s backrest while the child is asleep and then recline the backrest of the child seat to the same slant. The Viaggio 2/3 backrest will adapt to the slant of the car’s backrest, guaranteeing greater comfort for your child. M gu ca sa 8• th ba str 9• Iso th Te pu to (A Features of the product Fitting the child car seat with the safety belts and Surefix fittings For cars fitted with Isofix hooks th to be fitt 10 of ho fro th ab pr th This method can be used only if the car is fitted with Isofix hooks. For further information on the availability of these hooks and their location, refer to the instruction Fi w Fo fit 11 in in th he ld ust he ng he is ral a es he nd r’s ep he pt st, for manual of the car. Surefix fittings guarantee a greater safety, but cannot replace the function of safety belts. 8• To stretch the Surefix hooks, press the button on the front inside the bag, as shown in the figure, and stretch them manually. 9• Fix the Surefix connectors to the Isofix hooks of the car seat, verifying that they “click” in place (Arrow A). Tension the belt and simultaneously push the child car seat (Arrow B) towards the backrest of the car seat (Arrow C). IMPORTANT: after completing the operation, try moving the seat to verify that the Isofix fittings have been correctly hooked to the Isofix fittings . 10• To detach the Surefix connectors of the child car seat from the Isofix hooks, press the button on the front inside the bag and release the connectors belts in order to be able to manually detach them by pressing the safety lever situated on the hooks, as shown in the figure. How to secure your child on Viaggio 2/3 12• Secure your child with the car safety belt as shown in the figure. 13• Fix the car safety belt to the car, ensuring that it clicks in place. [. . . ] On • It is advisable to keep all the moving parts clean. € lean the plastic parts periodically C with a damp cloth. do not use solvents or similar substances. € Brush the fabric parts to remove dust. [. . . ]