User manual PEG-PEREGO PLIKO SWITCH

[. . . ] Press in the wheels until they click into place (fig_a) and check that they are firmly attached (fig_b). ATTACHING THE BASKET: insert the loops over the front hooks (fig_a) and rear hooks (fig_b) and button down the two flaps around the front tube (fig_c). [. . . ] FOOTREST: to lower the footrest push the two levers downwards and then push the footrest downwards (fig_a); to raise the footrest lift it upwards (fig_b). BABY SAFE SYSTEM: the stroller is fitted with a Baby Safe system which prevents the child from slipping forwards when lying down. Pull the Baby Safe netting out of the pocket under the rear ledge (fig_a), release the front bar, insert it into the netting (fig_b) and reattach the front bar. Figure C shows the Baby Safe netting in place. 5-POINT SAFETY HARNESS: to attach the safety harness, insert the two buckles of the waist strap (with shoulder straps attached) into the leg divider strap until it clicks into place (fig_a). To release, press both sides of the buckle and pull the waist strap to the sides at the same time (fig_b). To secure the child with the safety harness, insert the shoulder strap buckle in the special holder on the backrest (fig_a) and, after fastening the harness, detach the buckle from the backrest to allow the child more freedom of movement (fig_b). Position the shoulder strap buckle just below the child's shoulders to ensure the straps remain in place without slipping (fig_c). To tighten the waist strap, pull on both sides in the direction of the arrow (fig_d). The waist strap can be tightened as far as the safety lock (fig_e). hOOD: to open the hood , pull it forward. to convert the hood into a sun canopy , open the double zipper (fig_c) and unfasten the snaps on the rear of the backrest. REAR LEDGE: the rear ledge makes it easier to negotiate curbs (fig_a) and can also be used to transport a To use the stroller with two children, apply the brakes, position the smaller child in the seat and attach the safety harness (1). Grip the handles (2) and help the second child to climb onto the ledge (3). [. . . ] Do not use solvent or similar cleaning products; keep all metal parts dry to prevent rusting; keep moving parts clean (adjustment mechanisms, locking mechanisms, wheels, . ) and free of dust and sand and, if necessary, lubricate with light machine oil. [. . . ]