User manual PENTAX 645 ADAPTER K FOR LENSES

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · CompactFlash and CF are trademarks of SanDisk Corporation. · PENTAX is a trademark of PENTAX Corporation. · Optio is a trademark of PENTAX Corporation. [. . . ] The flash never discharges regardless of light conditions. The flash always discharges regardless of light conditions. Reduces red-eye in the picture, caused by the flash Auto flash + redreflecting from the subject's eyes. The flash eye reduction discharges automatically. Reduces red-eye in the picture, caused by the flash Flash On + red-eye reflecting from the subject's eyes. reduction The flash discharges regardless of lighting conditions. d · The flash is always off when the Capture mode is set on C, Continuous shooting, or Infinity-Landscape. · When using the flash, it always discharges once before taking the picture, to assist with metering. · In Auto + red-eye reduction or Flash On + red-eye reduction, the flash discharges once before taking the picture to make the iris of the subject's eyes contract, shortly before firing again to take the picture. 1 Press the b button in Capture mode. This will switch focus modes, and the current icon is displayed on the LCD monitor. The camera is ready to take a picture in the selected flash mode. Flash Lamp 1 p. 23 Saving the Flash Mode 1 p. 72 Rec. Mode Recorded Pixels Quality White Balance Forcusing Area AE Metering Sensitivity MENU 2048 1536 AUTO Wide AUTO OK Four-way controller OK button MENU button Exit Ok A Picture Mode B F GDl Selecting the Recorded Pixels Select the number of recorded pixels from 2048×1536, 1600×1200, 1024×768, 640×480. The more pixels there are, the larger the image size and file size. The image file size will also differ according to quality level settings. 2048×1536 1600×1200 1024×768 640×480 Suited for printing on A4 paper. Measures mainly the center of the screen to determine exposure. Measures only the very center of the screen to determine exposure. 1 2 3 Select [AE Metering] on the [A Rec. Press the four-way controller (45) to change the metering mode. Press the OK button. The camera is ready to take a picture. Rec. Mode Recorded Pixels Quality White Balance Forcusing Area AE Metering Sensitivity MENU 2048 1536 AUTO Wide AUTO OK Exit Ok Saving the AE Metering Method 1 p. 72 Rec. Mode Recorded Pixels Quality White Balance Forcusing Area AE Metering Sensitivity MENU 2048 1536 AUTO Wide AUTO OK Four-way controller OK button MENU button Exit Ok A Picture Mode B F GDl Setting Sensitivity You can set the Sensitivity to match the brightness of the surroundings. AUTO 100 200 400 4 Taking Pictures The camera makes the adjustment automatically. · The lower the Sensitivity (smaller number), the sharper the image with less noise. The shutter speed will be slower in low light conditions. · The higher the Sensitivity (larger number), the faster the shutter speed in low light conditions. The image will have more noise. 1 2 3 Select [Sensitivity] on the [A Rec. Press the four-way controller (45) to change the sensitivity. Press the OK button. The camera is ready to take a picture. Rec. Mode Recorded Pixels Quality White Balance Forcusing Area AE Metering Sensitivity MENU 2048 1536 AUTO Wide AUTO OK Exit Ok The only available AUTO settings are 100 and 200. Saving the Sensitivity 1 p. 72 45 Rec. Mode Recorded Pixels Quality White Balance Forcusing Area AE Metering Sensitivity MENU 2048 1536 AUTO Wide AUTO OK Four-way controller OK button MENU button Exit Ok A Picture Mode B F GDl Setting the Instant Review Time 4 Taking Pictures 46 You can select the Instant Review display time from 0. 5 sec, 1 sec, 2 sec, 3 sec, 5 sec, or OFF (no display). 1 2 3 Select [Instant Review] on the [A Rec. Press the four-way controller (45) to change the display time. Press the OK button. The camera is ready to take a picture. Rec. Mode Digital Zoom Instant Review Soft Setting Ex. Bracket Step WB Bracket Step 3D Mode MENU 0. 5s 0. 3 1 Parallel OK Exit Ok The Instant Review setting stays the same even after the camera is turned off. A Picture Mode B F GDl Setting Image Sharpness You can make the image outlines sharp or soft. 1 2 3 Select [Sharpness] on the [A Rec. [. . . ] Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing. 7 Appendix 99 · This warranty policy does not affect the customer's statutory rights. · The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. 7 Appendix The CE Mark is a Directive conformity mark of the European Community. 100 For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]