User manual PENTAX 67 REAR CONVERTERS 1.4X & 2X & T6-2X

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. To users of this camera · There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. · The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99. 99% or better, you should be aware that 0. 01% or fewer of the pixels may not illuminate or may illuminate when they should not. [. . . ] h (0 sec remote control): The picture is taken immediately. · Focusing may be compromised if you move the camera while the self-timer lamp is blinking. · You cannot use the remote control unit in Movie mode. i (Remote control) 87 Changing the Magnification Using the Remote Control Unit You can not only shoot images with the shutter release button, but also change the zoom magnification with the zoom button using the remote control unit E (optional). 1 2 3 4 Taking Pictures 88 Press the four-way controller (2) in Capture mode. Press the four-way controller (45) to select i(Remote control) or h(0 sec remote control). The function is same either in i (Remote control) or h(0 sec remote control). Press the zoom button on the remote control unit. Each time you press the zoom button, the zoom position will change among tele, middle, and wide. You cannot change the zoom magnification with the remote control unit in Super Macro mode. · The buttons on the camera can be used in the normal way. · Be sure that the remote control unit is no more than about four meters away from the front of the camera. · When operating with the remote control unit, only the optical zoom is available. Digital Zoom and Intelligent Zoom are not available with the remote control unit. Life of the Battery for the Remote Control Unit A signal can be sent from the remote control unit to the camera approximately 30, 000 times. You can adjust the focus on a subject in the following ranges. 2. 3 m (7. 55 ft. ) ­ (full wide-angle), approx. 9. 3 m (30. 51 ft. ) ­ (full telephoto) When taking movies: approx. 0. 9 m (2. 95 ft. ) ­ (full wide-angle), approx. 3. 7 m (12. 14 ft. ) ­ (full telephoto) 4 Taking Pictures q Macro mode r Super Macro mode Pan Focus mode This mode is used for taking distant objects. s Infinity mode Manual Focus mode Adjust the focus manually with the four-way controller. z Saving the Focus Mode 1p. 122 91 1 2 3 Press the four-way controller (5) in Capture mode. Press the four-way controller (23) to select the focus mode. Press the OK button. The camera is ready for taking pictures in the selected focus mode. MENU Focus Mode Standard Cancel OK OK 4 Taking Pictures 92 Auxiliary AF light · The auxiliary AF light may be activated under low lighting in Autofocus mode. · The auxiliary AF light of this camera conforms to the safety standard (IEC60825-1) for Class 1 LED product. Looking at the light directly will not create safety hazard. [. . . ] Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio S12 Contact person: Customer Service Manager Date and Place: January, 2008, Colorado 8 Appendix 209 Information on disposal for users 1. [. . . ]