User manual PENTAX 6X7 LENS ADAPTER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PENTAX 6X7 LENS ADAPTER. We hope that this PENTAX 6X7 LENS ADAPTER user guide will be useful to you.
Lastmanuals help download the user guide PENTAX 6X7 LENS ADAPTER.
Manual abstract: user guide PENTAX 6X7 LENS ADAPTER
Detailed instructions for use are in the User's Guide.
[. . . ] When using the AC adapter, make sure that the DC terminal is properly connected to the camera.
Operation is not guaranteed on all PCs meeting the system requirements.
57536
01-200505 Printed in Philippines
Windows
Step 2
Installing the Software
Installing the Image Processing Software (ACDSee for PENTAX 2. 0)
This section describes the procedures for installing ACDSee for PENTAX 2. 0, which lets you view and edit images transferred to your PC.
· Windows Media Player 7. 1 or later must be installed in your PC to install ACDSee for PENTAX 2. 0. · When multiple accounts have been setup in Windows 2000 or Windows XP, log on with an account that has administrative rights before installing the software.
5
Macintosh
Click [ACDSeeTM].
Follow the on-screen guidance and enter the registration information when the Setup screen appears. Reboot your PC after installation is finished (Other settings are not necessary during installation).
Step 2
Installing the Software
Installing the Image Processing Software (ACDSee for PENTAX)
This section describes the procedures for installing ACDSee for PENTAX, which lets you view and edit images transferred to your Macintosh.
1 2
Turn your PC on. Insert the CD-ROM (S-SW32) into the CD-ROM drive.
The PENTAX Software Installer screen appears. [. . . ] · If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 1) Double-click [My Computer] on the desktop. 2) Double-click the [CD-ROM drive (S-SW32)] icon. 3) Double-click [Setup. exe].
If QuickTime and DirectX are not installed in your PC, a message such as the one shown on the right appears when ACDSee for PENTAX 2. 0 is run. Click [Close] and install QuickTime and DirectX from the [PENTAX Software Installer] screen.
1 2 3 4 5
Turn your Macintosh on. Insert the CD-ROM (S-SW32) in the CD-ROM drive. Double-click the [Install ACDSee] icon.
The PENTAX Software Installer screen appears. Double-click the [Master Installer] icon to display the PENTAX Software Installer screen.
If QuickTime and DirectX are not installed in your PC,
operation of ACDSee for PENTAX 2. 0 is not guaranteed. If your PC is running Windows Media Player earlier than version 7. 1, a message such as the one shown on the right may appear during installation. In this case, follow the instructions below to update Windows Media Player before installing the software. Press the four-way controller (5).
Set-up Brightness Level Video Out USB Connection Auto Power Off Fn Setting Reset
MENU
NTSC
Connecting the Camera and PC For Windows user go to Windows Step 4
3min
Exit
OK
OK
1 2
Turn your PC on. With your camera turned off, connect to your PC using the USB cable.
If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transmitted to your PC.
9
Select [Copy To Folder. . . ] from the [Edit] menu.
The Copy Files screen appears.
Press the four-way controller (23) to select [PC]. Press the OK button twice.
USB Connection
PC PictBridge
10 11
OK
Specify the destination folder. Click [OK].
The image is copied to the PC.
MENU
Exit
OK
· Do not connect the camera to your PC while [PictBridge] is selected for the USB Connection mode. · Do not connect the camera to your printer while [PC] is selected for the USB Connection mode. · If you connect the camera to a PC while the USB connection mode is set to [PictBridge], do the following operation according to your operating system. After completing the procedure, change the connection to [PC] and reconnect the camera and PC again.
OS Windows XP Windows 2000 Windows Me MacOS 10. 3 MacOS 10. 2 MacOS 10. 1 Follow this instruction Turn off the camera and remove the USB cable from your PC. Click "Cancel", turn off the camera and "Found New Hardware Wizard" is displayed. Click "Cancel", turn off the camera and "Found New Hardware Wizard" is displayed. The i-Photo function starts, but the image cannot Turn off the camera and remove the USB be identified. [. . . ] The i-Photo function starts, but the image cannot Turn off the camera and remove the USB be identified. Nothing is displayed on the camera and your Turn off the camera and remove the USB Macintosh computer. "Print error" is displayed on the camera's LCD Turn off the camera and remove the USB monitor. The message "Software needed for the USB Click "Cancel", turn off the camera and device "Unnamed device" is not available. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX 6X7 LENS ADAPTER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX 6X7 LENS ADAPTER will begin.
