User manual PENTAX AF201SA

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX and Optio are trademarks of HOYA CORPORATION. · SDXC Logo is a trademark of SD-3C, LLC. · ArcSoft, and its logo are either the registered trademark or trademark of ArcSoft Inc. [. . . ] Press the 3 button twice. The camera returns to capture status. The D-Range Setting icon appears on the display. 38 P Q O When [Highlight Correction] is set to O When [Shadow Correction] is set to O When [Highlight Correction] and [Shadow Correction] are both set to O 03/03/2011 14:25 · When [Highlight Correction] is set to O, the minimum sensitivity is ISO 125. · If you change the [Highlight Correction] or [Shadow Correction] setting frequently, you can save time by assigning it to the Green button (p. 107). 95 Adjusting the White Balance You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting. F Auto The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking pictures under electric or other tungsten light. Use this mode when taking pictures under fluorescent light. Use this mode when adjusting the white balance manually. Light Manual G H I 3 Taking Pictures J K · Set another white balance setting if you are not satisfied with the color balance of pictures taken with the [White Balance] set to F. · Depending on the selected shooting mode, the white balance setting may not be changed. · In 9 (Green) mode or when recording a movie, only [Auto] (sensitivity 64 - 800) is available. · In c (Digital SR) mode, only [Auto] (sensitivity 64 - 6400) is available. · In S (Fireworks) mode, the sensitivity is fixed at the minimum value. · If you change the [Sensitivity] setting frequently, you can save time by assigning it to the Green button (p. 107). Saving the Sensitivity setting 1p. 113 Switching the Face Detection Function The S1 comes with a Face Detection function that spots the faces in your shot and automatically adjusts the focus and exposure for the faces. It will automatically release the shutter when people are smiling, or if anyone blinked, it will tell you that so you can take the shot again until it is perfect. The default setting is [On] for [Face Detection] and O (On) for [Blink Detection]. 1 2 100 Press the 3 button in A mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Face Detection]. 3 4 Press the four-way controller (5). A pull-down menu appears. Use the four-way controller (23) to select an option. On Smile Off The camera detects a person's face. The camera automatically release the shutter when your subject smiles. The camera does not detect a person's face. Rec. Mode 2/3 D-Range Setting Shake Reduction Face Detection On Blink Detection Smile Digital Zoom Off Instant Review MENU Cancel OK OK 5 6 7 3 Taking Pictures Press the 4 button. The setting is saved. To set the Blink Detection function, press the four-way controller (3) to select [Blink Detection]. [. . . ] 83, 138 Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 203 Movie SR (Movie Shake Reduction) Function . . . . . . . . 112 MSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 Multi-segment metering L . . . . . . . . . . . . . . . . . . . . . . . [. . . ]