User manual PENTAX DATA K

[. . . ] for PENTAX (Movie editing software) · QuickTime 7 · DirectX 9. 0 · USB driver for Windows 98/98 SE Step 4 *on reverse side Step 4 Macintosh System Requirements USB connection · OS : Mac OS 9. 2/X (10. 1 or later) · USB port must be standard equipment Connect the camera and your PC, and transfer images. Connect the camera and your Macintosh, and transfer images. <ACD Showtime!for PENTAX> (Six languages: English, French, German, Spanish, Italian, Japanese) · OS · CPU : Windows 98 SE/Me/NT/2000/XP (Home Edition/Professional) : Pentium III 500 MHz or higher (Pentium 4 2. 0 GHz or higher recommended) Memory : 128 MB minimum (512 MB or higher recommended) Hard Disk space : 50 MB minimum Internet Explorer 5. 0 or later QuickTime 6 or later Windows Media Player 7. 1 or later DirectX 9. 0 or later Installation of the driver is not necessary. Application Software Macintosh · ACDSee for PENTAX (Image viewing/editing software) You are recommended to use an AC adapter connected to a power outlet when connecting the camera to a computer. If the battery runs out of power while images are being transmitted to the computer, the image data may be lost or damaged. When using an AC adapter, make sure that the AC plug cord is properly connected to the camera. Step 5 *on reverse side Step 5 *on reverse side <ACDSee for PENTAX> (Six languages: English, French, German, Spanish, Italian, Japanese) : Mac OS 9. 2 or later (requires QuickTime 6 or later and the latest version of CarbonLib) · CPU : PowerPC 266 MHz or higher · Memory : 8 MB minimum · Hard Disk space : 6 MB minimum · OS Use the supplied software to view and edit images transferred to your PC. [. . . ] If the proper versions of Quick Time and DirectX are not installed on your PC: A message, such as the one shown on the right, appears when ACDSee for PENTAX 2. 0 is run. Click [Close] and install QuickTime and DirectX from the PENTAX Software Installer screen. Macintosh Step 2 Windows, Macintosh Step 3 Installing the Software Install the image viewing/editing software (ACDSee for PENTAX 2. 0). · Windows Media Player 7. 1 or later must be installed in your PC to install ACDSee for PENTAX 2. 0. · When multiple accounts have been setup in Windows 2000 or Windows XP, log on with an account that has administrative rights before installing the software. Installing the Software Install the image viewing/editing software (ACDSee for PENTAX). Setting Up Your Digital Camera Setting the USB Connection Mode to [PC] 1 2 3 4 5 6 Press the 3 button. Press the four-way controller (45) to display the [B Setting] menu. Use the four-way controller (23) to select [USB Connection]. Use the four-way controller (23) to select [PC]. Press the 4 button. If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the images cannot be transferred. Disconnect the USB cable from your camera and PC to set the USB Connection mode to [PC], and then reconnect the USB cable. Setting Folder Name USB Connection Video Out Auto LCD Dimmer Auto Power Off MENU Cancel 1 2 Turn your PC on. Insert the CD-ROM (S-SW48) into the CD-ROM drive. The PENTAX Software Installer screen appears. If the PENTAX Software Installer screen does not appear Display the PENTAX Software Installer screen following the steps below. 1) Double-click [My Computer] on the desktop. provides a variety of transitions and effects for slide shows, editing tools for correcting images and tools for trimming videos and audio files. Using the Software Using ACDSee for PENTAX 2. 0 ACDSee for PENTAX 2. 0 lets you view, edit, organize, search for, share, and print images. Connecting the Camera and PC 1 2 Turn your PC on. With your camera turned off, connect it to your PC using the USB cable. If there is no SD Memory Card in the camera, the images stored in the built-in memory will be transmitted to your PC. 9 Select [Copy To Folder. . . ] from the [Edit] menu. The Copy Files screen appears. Starting ACDSee for PENTAX 2. 0 1 Double-click the [ACDSee for PENTAX 2. 0] icon on the desktop. ACDSee starts and the main window, which is called the browser, appears. The first time ACDSee for PENTAX 2. 0 is run, "ACDSee has detected that you do not have the following software installed on your computer: Ghostscript 7. 0 (or later)" may appear in the [Components missing] dialog box. If you will only display or edit images inside the digital camera, it is not necessary for Ghostscript 7. 0 to support ACDSee for PENTAX 2. 0. Click [Close] to close the message window. 1 Double-click the [ACD Showtime!for PENTAX] icon on the desktop. ACD Showtime!for PENTAX] screen appears. 2 Click [Create Video File]. Follow the on-screen guidance. For details on how to use these functions, see the help pages. 3 10 Specify the destination folder. 11 Click [OK]. The image is copied to the PC. 2 Disconnecting the Camera from Your PC 1 Double-click the in the task bar. [Safely Remove Hardware] icon ACDSee Browser Interface 3 Turn your camera on. The Device Detector screen appears automatically. If the Device Detector screen does not appear, display and copy the images following the steps in "When the Device Detector screen does not appear". [. . . ] Preview pane Displays a preview of the image or media file currently selected in the File List pane. You can change the size of the preview image or play back the media file. Favorites pane You can add frequently used items (folders, etc. ). File List pane Displays the contents of the currently selected folder or the results of the most recent search, in other words the file or folder that matches the search item. [. . . ]