User manual PENTAX EFINA

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] The shutter speed is automatically set according to the aperture. The aperture will affect the depth-of-field of the picture. If you set a large aperture (lower F value), you can capture portrait images with an out-of-focus background. Alternatively, if you set a small aperture (higher F value), both close objects and distant objects will be in focus, for example when capturing subjects in the foreground together with landscape images. Set the aperture value with or , and press the 4. Compose your subject within the focus frame. Press the shutter button to capture the image. Av F2. 8 Select: OK : EN-33 Shutter Speed Priority Mode [ ] If you set a fast shutter speed, you can capture images of moving subjects that look as if they are still. If you set a slow shutter speed, you can capture images that give the impression that the subject is in motion. Set the aperture value with or , and press the button. 1/125S Select: OK : Tv 4. Compose your subject within the focus frame. Press the shutter button to capture the image. Manual Mode [ ] In manual mode, the aperture value and the shutter speed can be varied individually. Press the MENU button, then use to select the [Mode2] menu. Use to select [AE Metering], then press the Mode1 Mode2 Mode3 AE Metering Drive Mode Digital Zoom Instant Review OK: Exit : On Off 1/4 4. Use or to select the desired metering mode, then press the button. [ Center-Weighted]: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. [ Spot]: The exposure is determined by the small area in the center of the screen only. To exit the menu, press the MENU button. Compose your subject within the focus frame. Press the shutter button to capture the image. AE Metering Center-Weighted Spot OK : Exit : 1/2 EN-37 PLAYBACK MODE - THE BASICS Viewing Images You can display the still images one by one. Rotate the mode dial to , , , , , or and turn your button. The last recorded image appears on the LCD monitor. To view the next image, press . 100-0001 Size EV 01. 07. [. . . ] In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. [. . . ]