User manual PENTAX EI100

[. . . ] For customers in the USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Press the OK button again to re-format the internal memory or CF card. The cursor returns to the SETUP MENU. 14 Operating Modes and Menus CAPTURE Mode Set the Operating Mode Dial to CAPTURE for image capturing. INSTANT REVIEW MODE: Toggles On/Off the QuickView function. Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor skips to the last field as the OK button being pressed. Use the arrow buttons ( / ) to select the desired setting. The cursor returns to the CAPTURE menu automatically when the change is made. The setting is conserved even if the camera power is off. CAPTURE Menu Press the Menu button in CAPTURE mode, the Capture menu appears. The menu contains the following items: LCD BRIGHTNESS: Changes the brightness setting ( -5 ~ +5 , Interval = 1 ) of the LCD display. Press the OK button to select this item. The cursor skips to the last field as the OK button being pressed. Use the arrow buttons ( / ) to increase/decrease the LCD brightness. Press the OK button again to make the change. The cursor returns to the CAPTURE menu automatically when the change is made. The setting is conserved even if the camera power is off. WHITE BALANCE: Select either one of the 5 (Auto, Daylight, Shade, Fluorescent, Tungsten) white balance settings. The auto white balance is recommended for most cases. For certain critical circumstances, if the result did not come out as expected, you may manually change to another white balance type according to the ambient lighting condition. 15 Select the item by the arrow buttons ( / ) and then press the OK button to confirm. The cursor skips to the last field as the OK button being pressed. Use the arrow buttons ( / ) to select the desired white balance type. Press the OK button again to make the change. The cursor returns to the CAPTURE menu automatically when the change is made. This setting is reset to AUTO when the camera power is off. increase/decrease the EV compensate value (-2. 0 ~ +2. 0). Press the OK button again to make the change. The cursor returns to the CAPTURE menu automatically when the change is made. This setting is reset to O. O when the camera power is off. DIGITAL ZOOM: Press the DISPLAY button. [. . . ] To disable the self-timer function, do any of the following: Press the Self-Timer button again. Change to another mode other than CAPTURE mode. Operating Mode Dial Switch the Operating Mode Dial to select the desired operating mode. There are five operating modes available as follows: CAPTURE: Capture/stores images PLAY: Review images in memory DELETE: Delete images in memory 23 Images Remaining/Image Number Indicator The digit number on the Status LCD may have different meanings in each mode: Capture Mode: Shows the number of the images that can be captured in your camera with current settings. Play Mode: Shows the total amount of the captured images in your camera. [. . . ]