User manual PENTAX ESPIO 115G

[. . . ] Illustrations shown herein may differ from the actual appearance. 5. 6 4 2. 81 15 8 2 10 3 50 8 A 22 16 11 . 4 CONTENTS ° FOR SAFE USE OF YOUR LENS ° PRECAUTION AND LENS MAINTENANCE ° smc PENTAX F, FA and FA J LENSES · Mount compatibility ° MOUNTING AND REMOVING OF LENS ° FINGER POINT ° APERTURE CONTROL ° FOCUSING ° HOW TO USE INFRARED INDEX ° LENS HOOD · Square lens hood · Round-type lens hood · Built-in lens hood ° FILTER ° ZOOM LENS ° POWER ZOOM LENS · Power zoom ring 1 2 3 ° 5 6 6 7 9 10 ° ° ° 14 16 17 ° ° ° · Aperture · Infrared index of the zoom lens MACRO LENS 22 · Focus range limiter · Clamp screw · Tripod mount · Magnification WIDE-ANGLE LENS (FA 24mm f/2 AL (IF) ) 27 TELEPHOTO LENS FA 85mm f/1. 4 (IF) FA 200mm f/2. 8ED (IF), FA 300mm f/4. 5ED (IF) 28 · Note on (infinity) mark PRECAUTIONS WHEN THE FLASH IS USED 30 SOFT CASE FOR LENS 31 SPECIFICATIONS 32 COMPATIBILITY OF LENSES WITH THE BUILT-IN FLASH 38 FOR SAFE USE OF YOUR LENS Although we have carefully designed these lenses for safe operation, please pay special attention to items marked with the following symbols when using this product. WARNING CAUTION This mark indicates precautions that if not followed, could result in serious injury to the user. This mark indicates precautions that if not followed, could result in minor or medium injury to the user or damage to the equipment. CAUTION · Do not leave the lens in direct sunlight without lens caps. Sunrays passing through the lens will be intensified, and should they focus on flammable materials, fire may occur. WARNING · Never look at the sun through the lens or camera. Serious damage to the retina, or total loss of eyesight may occur. [. . . ] Precaution on filters Attaching the filter to your lens becomes a part of the optic. Avoid using no more than one filter exception of with a polarizing filter, as deterioration in image quality may results. · Attach the 43mm filters supplied with following lenses to the filter holder in the rear of lens. First, adjust zooming and then adjust focus using Autofocus or focus indicator in the viewfinder. The following zoom lenses also refer to its operating manual. FA 28-70mmf/2. 8AL FA 80-200mmf/2. 8ED FA 250-600mmf/5. 6ED The following lenses have power supply contacts to capable power zoom function with the KAF2-mount cameras. Refer to the camera's operating manual for more details. FA 28-70mmf/2. 8AL FA 28-105mmf/4-5. 6 FA 70-200mmf/4-5. 6 FA 80-200mmf/2. 8ED(IF) FA 250-600mmf/5. 6ED(IF) Auto zoom functions The FA Zoom lens with power contacts combined with KAF2-mount cameras can use following functions. Please refer to your camera's operating manual for more details. Zoom clip mode to pre-set or re-call the focal length 2. Image size tracking mode to maintain the image size (magnification value) regardless of the distance to the subject. · The focus range limiter may not turn where the focus range changes between long and short distances. · Using with the KAF2-mount cameras, manual focus will work with the focus-range limiter is set to MANUAL in autofocus mode. · FA Macro 200mm f/4ED (IF) lens has a focusing ring which provides autofocus and manual focus settings. Push the focusing ring forward or pull to change the focus mode from autofocus to manual. · With the KAF2-mount camera, when the focusing ring is set to MANUAL, the shutter cannot be released unless the focus indication appears in the view finder if camera is set to the autofocus mode (AF single mode). Focusing range Limiter set FA Macro 100mm f/2. 8 FA Macro 200mm f/4ED (IF) 24 Short-distance range 0. 306m(1x) - 0. 57m(1/4x) 0. 514m(1x) - 0. 7m(1/2x) Long-distance range Approx. 0. 6m - infinity Approx. 0. 7m - infinity Clamp Screw FA Macro 50mm f/2. 8 and 100mm f/2. 8 lenses are equipped with a clamp screw that is used when focusing manually. With manual close-up photography using the copy stand in any situation or with the lens pointing down , if you turn the clamp screw to the ON position, rotation of the focusing ring becomes tight. This helps to prevent the rotation of the focusing ring due to the lens's own weight and avoid any shift in focus. · When shooting in the autofocus mode, turn the clamp screw to the OFF position. Activating the autofocus mode while the clamp screw is in the ON position slows down the focusing speed. CLAMP ON F OF 25 Tripod Mount FA 200mm f/4 ED (IF) is equipped with the tripod mount. To position the camera vertically or horizontally, loosen the camera position shift lock screw, turn the camera 90° to the right or left as desired, and tighten the lock screw firmly. Camera position shift lock screw Magnification Scale The magnification is indicated by denominators on the distance scale. "5" indicates "1/5x". [. . . ] * 14 Vignetting will occur at focal lengths between 28mm-35mm and with the focal length set at 35mm and focus distance is closer than 3m and with 40mm at 1m. No vignetting will occur when the focal length is set at 50mm and/or longer toward tele-side. * 15 Vignetting will occur at focal lengths between 28mm-35mm and with the focal length set at 35mm and focus distance is closer than 1. 5m and with 35mm. * 16 Vignetting will occur at focal lengths between 28mm-40mm. [. . . ]