User manual PENTAX ESPIO 115S

[. . . ] Regarding copyrights Images taken using the x that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks PENTAX and smc PENTAX are trademarks of PENTAX Corporation. [. . . ] After the picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking. 122 · Exposure may be affected if light enters the viewfinder. Attach the provided ME viewfinder cap or use the AE lock function (p. 101). (The light entering the viewfinder has no effect on the exposure when the exposure mode is set to a (Manual) (p. 94). ) Removing the Eyecup FP Attaching the ME Viewfinder cap 4 Shooting Functions · Select a setting other than hor i in the [Drive Mode] screen to stop the remote control operation after it has been activated. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] (p. 217) of [A Rec. · The Shake Reduction function is automatically turned off when hor i is set. · The remote control may not operate in backlit conditions. · The remote control does not work while the flash is being charged. · The remote control unit battery can send a remote control signal about 30, 000 times. Contact PENTAX Service Center to replace the battery (this will involve a fee). Using Mirror Up Function to Prevent Camera Shake Use the Mirror Up function if camera shake is evident even when cable switch (optional) or remote control unit (optional) is used with a tripod. Self-Timer, the mirror pops up and the shutter is released 2 seconds after you press it, thereby avoiding the vibration of the mirror. Follow the procedure below to take a picture with the Mirror Up function. 123 1 2 3 4 Mount the camera onto a tripod. Release when Charging Off On 129 Enables shutter release while the built-in flash is charging 5 Using the Flash 130 Flash Characteristics in Each Exposure Mode Using the Flash in b (Shutter Priority) Mode · When taking a moving subject, you can use the flash to change the blur effect. · Any desired shutter speed 1/180 sec. or slower can be set for taking a flash photograph. · The aperture value automatically changes according to the ambient brightness. · The shutter speed is locked at 1/180 sec. when lens other than DA, D FA, FA J, FA, F or A is used. Using the Flash in c (Aperture Priority) Mode 5 Using the Flash · You can set the desired aperture to take a flash photograph when you want to change the depth of field or shoot a subject farther away. · The shutter speed automatically changes with the ambient brightness. · The shutter speed shifts automatically anywhere from 1/180 sec. to a slow shutter speed (p. 56) that reduces camera shake. The slowest shutter speed depends on the focal length of the lens in use. · The shutter speed is locked at 1/180 sec. [. . . ] The lithium battery used in this camera contains perchlorate material, which may require special handling. See www. dtsc. ca. gov/hazardouswaste/perchlorate 12 Appendix Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals We: Located at: PENTAX Imaging Company A Division of PENTAX of America, Inc. 600 12 th Street, Suite 300 Golden, Colorado 80401 U. S. A. Phone: 303-799-8000 FAX: 303-790-1131 Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. [. . . ]