Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PENTAX H10ZME. We hope that this PENTAX H10ZME user guide will be useful to you.
Lastmanuals help download the user guide PENTAX H10ZME.
Detailed instructions for use are in the User's Guide.
[. . . ] The lenses having CE marking on their bodies are conformity with the standards EN50130-4 and EN55022 related to EMC directives by EU. Cut it off at the base of the auto-iris cable sheath. [. . . ] With 4-pin connector model conforming to JEITA This alerts users to the possible risk of personal harm. This alerts users to the possible risk of personal and material harm. Do not look at the sun through the lens with the naked eye. If the lens emits smoke, smells of smoke or gives off heat, discontinue use immediately. Do not damage, bend, twist or pull on the cable. Connectors vary according to lens model and type (1, 2, 3 & 5) distinguished by the number after the hyphen, denoting different wiring and operating voltages. Metering method of the auto-iris can be linearly adjusted from average metering to peak metering (Pk). In case contrast of the image is too high or low, make adjustment according to the following table. Images ALC adjustment direction To make contrast lower Clockwise to (Pk) To make contrast higher Counter-clockwise to (Av) Please Note: · ALC may not function due to backlight compensation and AGC of the camera or cameras with a digital video output. Do not install the lens in a place where vibration and shock are expected. Do not use organic solvents, such as thinners, alcohol or benzine to remove stains from the lens. ⷠUse a blower or a clean lens brush to remove dust. [. . . ] When SW1 is closed, the iris is in manual override mode. Model Power supply Video signal Iris Sensitivity adjustment Iris accuracy Type 1 Type 2 Manual override iris Type 3 Type 5 Type 1 Operation voltage of Type 2 zoom and focus Type 3 motors Type 5 Operating temperature range Without D/A converter (Standard model) DC8V - 15V less 45mA V or VS 0. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX H10ZME
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX H10ZME will begin.
