User manual PENTAX IQZOOM 170SL

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks · PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporation. · All other brands or product names are trademarks or registered trademarks of their respective companies. To users of this camera · There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. [. . . ] Follow the procedure below to switch between Still Picture mode and Movie mode and between Capture mode and Playback mode. To Change from Capture Mode to Playback Mode 4 Taking Still Pictures 1 Press the Q button in Capture mode. The camera switches to Playback mode. To Change from Playback Mode to Capture Mode 1 or Press the Q button or the C button. Press the shutter release button halfway. The camera switches to Capture mode. 1 67 1 dRbcaC Selecting the Focus Mode Focus Modes 4 Taking Still Pictures 68 (No Autofocus mode icon) The camera focuses on the object in the focusing area when the shutter release button is pressed halfway. Use this mode when the distance to the subject is more than 40 cm (16 in) when zoomed out and more than 120 cm (47 in) when zoomed in. This mode is used when the distance to the subject is approx. 10 cm ­ 50 cm (4 in ­20 in) when zoomed out and Macro mode approx. 60 cm ­ 150 cm (24 in ­ 59 in) when zoomed in. The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. This mode is used when the distance to the subject is Super Macro approx. The camera focuses mode on the object in the focusing area when the shutter release button is pressed halfway. Infinity-Landscape This mode is used for taking distant objects. The camera is ready to take pictures in the selected flash mode. Saving the Flash Mode 1p. 84 2, 3 1 4 dRbca Adjusting the Flash Intensity You can adjust the amount of light emitted by the flash. 1 2 3 Press the MENU button in Capture mode. The [A Rec. Mode] menu appears. 4 Taking Still Pictures Use the four-way controller (23) to select [Flash Exp. Use the four-way controller (45) to change the light emission. Rec. Digital Filter Digital Zoom Instant Review Memory Sharpness 0. 00 x4 1 sec To increase the light emission, set a positive MENU E x i t OK OK (+) value. To decrease the light emission, set a negative (­) value. When a positive value has been set, the flash icon appears as j, and when a negative value has been set, the flash icon appears as k. 4 Press the OK button. The camera is ready to take pictures. 71 MENU Rec. Mode Recorded Pixels Quality Level White Balance Focusing Area AE Metering Sensitivity MENU E x i t 2304 AWB 2, 3 1 4 AUTO OK OK dRbca Selecting the Recorded Pixels 4 Taking Still Pictures 72 You can choose the number of recorded pixels of still pictures from [2304×1728], [1600×1200], [1024×768] and [640×480]. The more pixels, the bigger the picture and the larger the filesize. The quality level setting also affects the filesize of your pictures (1p. 73). Recorded Pixels 2304 1600 1024 640 (2304×1728) (1600×1200) (1024×768 )0 ( 640×480 ) Suitable for printing on A4 paper Suitable for printing on paper slightly larger than a postcard Suitable for printing on postcards Suitable for attaching to e-mails or creating websites 1 2 3 4 Press the MENU button in Capture mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Recorded Pixels]. [. . . ] · The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy. 10 Appendix 143 The CE Mark is a Directive conformity mark of the European Community. For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]