User manual PENTAX OPTIO 330GS

[. . . ] Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera. Thank you for buying the Pentax Optio 330GS Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera's capabilities. Regarding copyrights Images taken using the Optio 330GS that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. [. . . ] x cv b /0 Taking Stereo Pictures (3D Image Mode) You can take 3D pictures using the LCD monitor and view them by the parallel method or cross method (p. 58). If you print out the 3D pictures and look at them through the 3D image viewer provided, the image will appear in three dimensions. z x c v Set the Mode dial to . The LCD monitor screen is divided in two. The left half screen is for taking the first picture. Press the four-way controller ( to select [3D Mode]. ) Rec. Mode Set-up Taking Pictures Use the four-way controller ( ) to select [Parallel Mode] or [Cross Mode]. 2/3 To view the picture with the 3D image viewer, select [Parallel Mode]. You can also view it without the image viewer. The 3D image mode screen appears again. Auto Bracket Color Digital Zoom Instant Review Continuous Shooting 3D Mode Full 0. 5s Parallel Mode b n Take the first picture while watching the capture guide. Hold the camera so that the subject 14 is in the center of the left half screen, and press the shutter release button. The picture is displayed in the left half screen of the 1/60 10/23/2002 LCD monitor. The right half screen F2. 6 11:19 is for taking the second picture. 55 m , Move the camera to right without changing your stance. 14 Overlap the images. On the right side of the screen, 1/60 the first image will appear in a F2. 6 semi-transparent state on top of the second image. Compose the picture so that the first semi-transparent image is superimposed on the outlines of the second real image. The second picture will be taken, and the LCD monitor screen returns to the state described in b. If you continue shooting, follow the step described in n and afterwards. The LCD monitor screen displays both the first and second images. . /0 memo · To cancel the 3D image mode, change the 3D image mode to another Capture mode. · The display button will not activate in the 3D image mode. · A clear three-dimensional effect will not be achieved if the two images are taken in widely different positions (heights) or are not straight. When taking a person, you are recommended to ask your model to stay as still as possible and to take the second picture as quickly as you can. It is easier to take the pictures if you use a tripod or appropriate base. · As a guide, the camera should be moved about 1/40 of the distance between the camera and the subject. [. . . ] This equipment has been tested and found comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]