User manual PENTAX SP1000

[. . . ] Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. To users of this camera · There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. · The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99. 99% or better, you should be aware that 0. 01% or fewer of the pixels may not illuminate or may illuminate when they should not. [. . . ] · Only the Digital Zoom is available in Movie mode. Set Movie SR to Off in [A Rec. Mode] menu to use the Digital Zoom in Movie mode. (1p. 107) Setting the Digital Zoom The [Digital Zoom] is set to [O(On)] by default. To take pictures using only the optical zoom, set the [Digital Zoom] to [P(Off)]. 1 2 3 4 Press the MENU button in Capture mode. The [A Rec. Mode] menu appears. Use the four-way controller (23) to select [Digital Zoom]. Use the four-way controller (45) to select [O (On)/P (Off)]. Press the shutter release button halfway. The camera is ready for taking pictures. Rec. Mode EV Compensation ±0. 0 Movie Digital Zoom Instant Review 0. 5sec Memory Green Button MENU Exit Saving the Digital Zoom Function Setting 1p. 116 Setting the Shooting Functions Four-way controller OK button Selecting the Focus Mode Focus Mode = Standard (Autofocus mode) The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. Use this mode when the distance to the subject is more than approx. This mode is used when the distance to the subject is approx. The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. This mode is used when the distance to the subject is approx. You cannot adjust the focus while taking the movie. · To change Focus Mode from Manual Focus to another one, press the four-way controller (5) while the indicator is displayed on the LCD monitor. 4 Taking Pictures 89 Four-way controller OK button Selecting the Flash Mode Flash Mode 4 Taking Pictures 90 Auto The flash discharges automatically depending on the light conditions. The flash will not discharge, regardless of the brightness. Use this mode to take pictures at dusk or in museums etc. The flash discharges regardless of the brightness. This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject's eyes. This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subject's eyes. The flash will discharge regardless of lighting conditions. This mode reduces the intensity of the flash so that the flash is not too bright even when fired at close range. The flash will discharge regardless of the light conditions. a b c d b Flash Off Flash On Auto + Red-eye Flash On + Red-eye Soft Flash · The Flash Mode is fixed to Flash Off under the following conditions. - In Movie mode - In Continuous Shooting - When Focus Mode is set to Infinity mode · The picture is taken when the last flash is discharged after the preflash. [. . . ] Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2. 909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15. 101 to §15. 109. Product Name: PENTAX Digital Still Camera Model Number: Optio S10 Contact person: Customer Service Manager Date and Place: August, 2007, Colorado 8 Appendix 201 Information on disposal for users 1. [. . . ]