User manual PFAFF HD SCREEN

[. . . ] PFAFF® HD screen PFAFF® HD screen Your machine features a PFAFF® HD screen. This technology provides great resolution and color. The screen is very easy to work with - just touch it with your stylus or your finger tip to make your choices. The task bar at the bottom of the screen includes the main functions and help. [. . . ] You can program tie-offs, stops and thread snips into your sequence. Connection stitches can be inserted to create endless variations. Pfaff HD screen Stitch Creator Stitch Creator allows you to create your own 9mm stitch or edit built in stitches. Add, delete, move and adjust your stitch right on screen. Every single stitch point, marked with an outlined square, can be edited. Start with an empty stitch field and build your stitch or insert a stitch for further adjustments. 3:7 Settings menu In the Settings menu, you can override automatic settings and make manual adjustments to the machine settings (A), sound settings (B) and screen and light settings (C). Touch the icons to activate a function or open a list of choices. The settings are saved even after turning off the machine. Machine settings (A) Owner's name Touch the icon to get a pop-up where you can enter your name. Twin needle Touch the icon to open a list for twin needle width selections. When a twin needle size is selected, the width of all stitches is limited for that needle size to prevent needle breakage. The setting is kept until you deselect the twin needle width. When a twin needle size is selected, a pop-up is shown when turning on your machine. Another warning pop-up is shown when selecting a stitch that is too wide for the set twin needle size. The stitch width of those stitches is automatically adjusted to fit the twin needle. Deselect twin needle to go back to normal sewing. Stitch width safety Select this function when using a straight stitch stitch plate or a straight stitch presser foot to lock the center needle position for all stitches to prevent damage to the needle, presser foot or stitch plate. When turning on the machine with this setting activated and for every stitch selection that is not a straight stitch, a pop-up informs you that it is set to straight stitch. Deselect stitch width safety to go back to normal sewing. Note: Twin needle and stitch width safety cannot be used at the same time. Beading foot The beading foot setting will make sure that the tie-off is not made in the center position, where it might hit a pearl. You will find beading stitches in stitch category 6. 2. Deselect the beading foot setting to go back to normal sewing. Pfaff HD screen A B C Pop-up for twin needle selection. 3:8 AutoSave current state When AutoSave current state is selected, the machine will save current state periodically while embroidering and also when you stop embroidering. The information about the embroidery will be saved even after switching the machine off. [. . . ] When activated, the screen is locked everytime it is inactive for ten seconds. The screen will be locked until you unlock it by touching OK. Screen saver When activated, the screen turns off ten minutes after the last touch. Touch the screen or press any button to light the screen again. [. . . ]