User manual PFAFF PASSPORT™ 2.0

[. . . ] Owner’s manual 1 This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594. IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this household sewing machine. When using an electrical appliance, basic safety precautions should always be followed, including the following: DANGER – To reduce the risk of electric shock: or injury to person: WARNING from the electric outlet immediately after using and before cleaning. recommended by the manufacturer as contained in this manual. been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth. needle, changing needle, threading bobbin, or changing presser foot, etc. SAVE THESE INSTRUCTIONS SERVICING OF DOUBLE INSULATED PRODUCTS Congratulations! passport™ 2. 0 dimension of sewing! Table of contents Introduction 4 Sewing 21 Machine overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Presser feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Select a stitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Stitch adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The spool pins are designed for many types of thread. The main The horizontal position can be used for most position can be used for many specialty threads. Horizontal position Place a spool cap and the thread spool on the spool and slide on the second spool cap. Use a spool cap slightly larger than the thread spool. For narrow thread spools, use a smaller spool cap in front of the spool. For large thread spools, use a larger spool cap in front of the spool. between the spool cap and the thread spool. 11 Vertical position on the large spool cap and place a felt pad under reeling off too fast. A Auxiliary spool pin The auxiliary spool pin is used when winding a bobbin thread from a second spool of thread or for a second spool when sewing with a twin needle. Insert the auxiliary spool pin into the hole at the and place a felt pad under the thread spool. Threading the machine Make sure that the presser foot is raised and the needle is in its highest position. appropriately sized spool cap. from back to front. Thread down through the right-hand threading slot and then upwards through the left-hand threading slot. 5. Thread the needle. C B G F E 12 D Needle threader The needle threader allows you to thread the needle automatically. The needle must be in its highest position to use the built-in needle threader. Press the needle up/down button to make sure the needle is fully raised. We also recommend lowering the presser foot. Use the handle to pull the needle threader all through the needle eye. G 3. Let the needle threader gently swing back. The hook pulls the thread through the needle eye and forms a loop behind the needle. Pull the thread loop out behind the needle. F depends on the stitch position, the stitch width and/or the size B A Threading for twin needle Replace the sewing needle with a twin needle. Make sure that the presser foot is raised and the needle is in its highest position. Place the second thread on the spool pin. Thread down through the right-hand threading slot and then upwards through the left-hand threading slot. Place the threads into the lower and the other thread into the slot on the right sure that the threads do not become twisted together. Thread the needles. 13 A B Bobbin winding 1. Place the thread spool on the spool pin in against the spool. [. . . ] When you sew the stitch you should only see thread tension as needed to produce the desired effect. stitches even. 25 Blindhem The blindhem stitch, number 09, is used to make decorating. Use foot number 3 with IDT™ system. Fold and press the hem allowance to the wrong side. Fold the hem back on itself so approximately beyond the fold. [. . . ]