User manual PHILIPS AVENT BABYPHONE DECT 580/00

[. . . ] Always here to help you Register your product and get support at www. Com/welcome to register your product and to read the detailed user manual. €1) 1 Signal strength indicator 2 Eco Max indicator 3 Night dim mode symbol 4 Cry alert indicator 5 Mute symbol 6 Battery status indicator 7 Humidity alert symbol 8 Navigation arrow 9 Temperature symbol 10 Microphone sensitivity indicator 11 Nightlight symbol 12 Lullaby symbol 13 Projector symbol 14 Timer or timer repeat symbol 15 Soothing menu screen Preparing for use IMPORTANT: Read the safety instructions carefully before you use the baby monitor and keep them for future reference. Baby unit We advise you to use the baby unit from the mains. [. . . ] 1 If you want to comfort your baby, press TALK on the parent unit and talk clearly into the microphone on the front from a distance of 15-30cm (0. Note: If you have set the volume of the lullaby higher on the baby unit, the sound will also be louder when you use the talk function on the parent unit. 2 Release TALK when you have finished talking. 10 English Night dim mode In night dim mode, the light intensity of the lights and the display is reduced and the volume of alert sounds is decreased. 1 Press the night dim button, to switch on the night dim mode (Fig. 2 Press the night dim button again, to switch back to normal operating mode. Baby unit battery low alert 1 When the baby unit runs on battery power and its batteries are low, the parent unit beeps and the text ‘Baby unit Change batteries’ appears on the display. 2 If you do not replace the batteries in time, the link with the baby unit will be lost. Battery status indications Battery low When the rechargeable batteries are low, ‘BATTERY LOW’ appears on the display, the status indicator is empty and flashes, and the parent unit beeps. The remaining operating time is at least 30 minutes. Battery empty 1 If the rechargeable batteries are almost empty, the battery status light flashes red quickly (Fig. 2 If you do not connect the parent unit to the mains, it switches off. Menu of the parent unit Navigating the menu Note: Some menu functions only work when the baby unit and the parent unit are linked. 1 Press the MENU button to open the menu and to make the first menu option appear (Fig. 2 Use the + button to go to the next option or the - button to go to the previous option. The arrow on the display indicates in which direction you can navigate (Fig. Note: Press the MENU button if you want to leave the menu without making any changes. If there is no input in the menu for more than 20 seconds, the menu closes automatically. Sensitivity This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit. The microphone sensitivity determines what noise level the baby unit picks up, e. You will want to hear when your baby cries, but you may be less interested in its babbling. 1 Select ‘Sensitivity’ in the menu with the + and - buttons and press OK to confirm. [. . . ] Den reducerer automatisk DECT-signalet fra babyenheden for at spare energi. 2 Brug knappen + og - for at vælge “Eco Max”, og tryk på OK for at bekræfte. 6 For at stoppe timeren skal du vælge “Stop & Reset” (Stop og nulstil) i undermenuen for madningstimeren og trykke på OK for at bekræfte. 4 For at stoppe timeren skal du vælge “Stop & Reset” (Stop og nulstil) i undermenuen for madningstimeren og trykke på OK for at bekræfte. [. . . ]